Power amplifiers stereo — PrimaLuna EVO 100-4
Description, images, technical data and specifications
PrimaLuna EVO 100-4
Image source — © PrimaLuna
Specifications
Model name
EVO 100-4
Input sensitivity (mV)
880
Input impedance (balanced) (Ω)
N/A
Input impedance (single-ended) (Ω)
100 000
Output impedance (balanced) (Ω)
N/A
Output impedance (single-ended) (Ω)
N/A
Max current (A)
N/A
Output power (8Ω) (W)
40 / 45 (stereo)
Output power (4Ω) (W)
N/A
Gain (dBu)
28
Frequency response low +/- 3dB (Hz)
10
Frequency response high +/- 3dB (Hz)
95 000
Signal to Noise Ratio (dB)
92
Total Harmonic Distortion + Noise (0% global feedback) (%)
N/A
Total Harmonic Distortion + Noise (100% global feedback) (%)
0.2
Max power consumption (W)
280
Damping factor
N/A
Dimensions (mm)
405 x 280 x 190
Weight (kg)
17
Official link
More components
Power amplifiers stereo
PrimaLuna EVO 300 Hybrid Amp
A power amplifier that can output 150 watts in stereo and 300 watts in mono with a resistance of 4 ohms.
Power amplifiers stereo
PrimaLuna EVO 200-4
The PrimaLuna Evolution 200 Power tube power amplifier is built according to a push-pull circuit. The device is made in a classic metal case with an open lamp installation. The latter can be covered with a casing to protect them from accidental touching.
Power amplifiers stereo
PrimaLuna EVO 300-4
This stereo power amplifier can be easily switched to mono mode using the switch on the back panel. After that, your monoblock gets another tap at the output for a 2 ohm load (in addition to a 4 ohm and an 8 ohm), and two output transformers will provide better alignment with the speakers.
Power amplifiers stereo
PrimaLuna EVO 400-4
The PrimaLuna EVO 400 Power is the oldest of the four power amplifiers, producing 2 x 38 Watts of triode operation on EL34 lamps or 2 x 70 watts in ultraline mode. It can also operate on KT88 / KT120 / KT150 lamps, respectively, producing 2 x 43 / 2 x 45 / 2 x 51 watts in triode mode or 2 x 72 / 2 x 85 / 2 x 89 watts in ultralinear mode.
