In our electronics catalog you can find detailed specifications, photos and descriptions of almost all Hi-Fi and High End class components present on the market. Want to choose a device? All the necessary and up-to-date information is always at hand.
Lamm Industries
Three-block phono corrector-preamp Lamm LP1. Dual mono tube preamp with two separate neutral power sources equipped with full-wave vacuum rectifiers, choke filters, high-voltage vacuum lamp regulators, solid-state analog non-switchable low voltage regulators used as heater power sources. Lamp set: two-6C3P (6C3P), two-6C45P (6C45P) and (phono corrector); four-12AX3/12 BE3, two-6C19P (6C19P), two-6AK5, two-5651A (power supply).
Lamm Industries
A tube phono corrector, assembled according to the principle of double mono. RIAA correction is passive, on high–quality elements with minimal tolerances. There is no general negative feedback. The amplification stages are based on unique 417A/5842 lamps manufactured by Western Electric, which have high steepness characteristics.
Schiit Audio
The Skoll F. phono corrector is a fully balanced, discrete Class A, feedback—free phono corrector that provides an even higher level of amplification than the Stjarna. With low noise levels and up to 70 dB gain, as well as the ability to use balanced inputs, Skol offers the highest value for money.
Gryphon Audio
Compared to the Ortofon MC Diamond on which it is based, Gryphon’s Black Diamond DLC stands out visually with its rich black DLC (diamond-like carbon) coating. The DLC-TR SLM-coated titanium used in the Black Diamond DLC was developed by Gryphon in collaboration with the Danish Institute of Technology and offers tangible sonic benefits: the speed of sound transmission and resonance of titanium is doubled from 9,000 meters per second to 18,000 meters per second. Gryphon thus claims to achieve a level of clarity, detail and musicality that is unachievable in any other way. Full specs coming soon.
Aries Cerat
Aries Cerat Talos MK2 is designed using transformer isolation of all cascades. The detailed performance characteristics of the device are as follows - Aries Feat Talos MK2 provides 62 or 80 dB gain coefficients, the noise level does not exceed -88 dB. The range of cartridge loads is endless, and all models available on the market are supported. MM heads with a very high output signal can be used without overloads.
Aries Cerat
Talos MKII Signature is a two-block phono corrector with a unique option of a step-up transformer for MS at the input, the parameters of which are selected individually for a specific model of the customer's MS pickup. The phono corrector is made according to a completely symmetrical scheme and has both unbalanced and balanced inputs and outputs. The input stage on the Siemens E280F pentode provides primary amplification of weak input signals with minimal noise. The input parameters of the phono corrector can be selected for a specific type of pickup.
Aries Cerat
Aries Cerat Talos MK2 is designed using transformer isolation of all cascades. The detailed performance characteristics of the device are as follows - Aries Feat Talos MK2 provides 62 or 80 dB gain coefficients, the noise level does not exceed -88 dB. The range of cartridge loads is endless, and all models available on the market are supported. MM heads with a very high output signal can be used without overloads.
Vtl (Vacuum Tube Logic)
The VTL TP-6.5 phono corrector uses hybrid (JFET/tube) circuitry to minimize noise, several low-noise cascaded stabilizers, and shielded power supplies to improve dynamics. The VTL TP-6.5 provides high-precision RIAA correction and has a 68 dB gain on balanced outputs. All necessary settings and adjustments can be performed both from the front panel and from the remote control.
Vtl (Vacuum Tube Logic)
The VTL TP-2.5 tube phono corrector, made in a separate case, is designed for joint use with integrated and pre-amplifiers that are not equipped with phonoscades. The phono corrector is designed to work with both MM and MS cartridges. It is assembled using audiophile-class electronic components and is equipped with a toroidal power transformer with a radio frequency interference filter.
Audio Research
Audio Research Reference Phono 3 SE is a tube phono corrector. Phono 3SE has a design developed from scratch, absorbing the successful findings from Reference Phono 2. In fact, the Reference Phono 3SE is a synthesis of developments from the entire Reference series. An additional gain stage allows you to obtain the linearity of gain characteristic of the Reference 10 and Reference 6 preamp models.
Audio Research
The Reference 10 is powered by a fully dual mono circuit. Dual, separate low- and high-voltage transformers are used for each channel; a dual mono stabilization circuit (one 6H30 and one 6550WE per channel), a dual mono gain circuit (four 6H30 per channel), and a powerful electrolyte bank.