Headphones — B&W (Bowers & Wilkins) Px8
Description, images, technical data and specifications
B&W (Bowers & Wilkins) Px8
Image source — © B&W (Bowers & Wilkins)
Specifications
Model name
Px8
Transducer principle
Dynamic
Scheme
Close
Wearing style
Over-ear
Frequency response low +/- 10dB (Hz)
10
Frequency response high +/- 10dB (Hz)
30000
Max. sound pressure level (dBSPL (1 kHz @ 5% THD))
N/A
Connection type
Wireless
Connector (mm)
N/A
Sensitivity (dBSPL (1 kHz/ 1 mW)))
N/A
Impedance (Ohm (1 kHz))
33
Playback time (hours)
N/A
Weight (g)
0.320
Official link
More components
Headphones
B&W (Bowers & Wilkins) Pi5 S2
The Pi5 S2 headphones received 9.2mm dynamic drivers and a rechargeable battery that will last for 19 hours of battery life. The noise reduction system is built on two microphones in each earphone, and the case itself is protected from moisture according to the IP54 standard.
Headphones
B&W (Bowers & Wilkins) Pi7 S2
The basis of this model are 9.2mm dynamic drivers, and three microphones in each headphone ensure high quality noise reduction system. The battery is enough for 16 hours of listening to your favorite songs.
Headphones
B&W (Bowers & Wilkins) Pi6
The B&W P6's biocellulose 12mm headphone drivers deliver high-quality audio. The model is equipped with noise reduction technology and IP54 moisture protection, and the battery life on a single charge is 16 hours.
Headphones
B&W (Bowers & Wilkins) Pi8
The headphones are powered by 12 mm carbon emitters with integrated noise reduction technology and are protected from moisture penetration according to the IP54 standard. Together with the charging case, the working time is 13.5 hours.
Headphones
B&W (Bowers & Wilkins) Px7 S2
The Px7 S2 model, made in classic black, is equipped with a pair of 40 mm dynamic drivers made of cellulose. The distortion factor is less than 0.1%. A full battery charge is enough for 30 hours of operation, and 15 minutes of mains power gives 7 hours of listening to your favorite music tracks.
