Hifiverse

Headphones — B&W (Bowers & Wilkins) Px8 McLaren Edition

Description, images, technical data and specifications

B&W (Bowers & Wilkins) Px8 McLaren Edition
Image source — © B&W (Bowers & Wilkins)

The B&W PX8 McLaren Edition is a special version of headphones created in collaboration with the iconic automaker. The model is equipped with a pair of 40 mm emitters and a single charge operation time of 30 hours at a moderate volume level.

Specifications

  • Model name

    Px8 McLaren Edition

  • Transducer principle

    Dynamic

  • Scheme

    Close

  • Wearing style

    Over-ear

  • Frequency response low +/- 10dB (Hz)

    10

  • Frequency response high +/- 10dB (Hz)

    30000

  • Max. sound pressure level (dBSPL (1 kHz @ 5% THD))

    N/A

  • Connection type

    Wireless

  • Connector (mm)

    N/A

  • Sensitivity (dBSPL (1 kHz/ 1 mW)))

    N/A

  • Impedance (Ohm (1 kHz))

    33

  • Playback time (hours)

    N/A

  • Weight (g)

    0.320

  • Official link

    https://www.bowerswilkins.com/en-us/product/headphones/px8-mclaren/300494-06-00-308.html

B&W (Bowers & Wilkins) Px8

More components

  • Pi5 S2

    Headphones

    B&W (Bowers & Wilkins) Pi5 S2

    The Pi5 S2 headphones received 9.2mm dynamic drivers and a rechargeable battery that will last for 19 hours of battery life. The noise reduction system is built on two microphones in each earphone, and the case itself is protected from moisture according to the IP54 standard.

  • Pi7 S2

    Headphones

    B&W (Bowers & Wilkins) Pi7 S2

    The basis of this model are 9.2mm dynamic drivers, and three microphones in each headphone ensure high quality noise reduction system. The battery is enough for 16 hours of listening to your favorite songs.

  • Pi6

    Headphones

    B&W (Bowers & Wilkins) Pi6

    The B&W P6's biocellulose 12mm headphone drivers deliver high-quality audio. The model is equipped with noise reduction technology and IP54 moisture protection, and the battery life on a single charge is 16 hours.

  • Pi8

    Headphones

    B&W (Bowers & Wilkins) Pi8

    The headphones are powered by 12 mm carbon emitters with integrated noise reduction technology and are protected from moisture penetration according to the IP54 standard. Together with the charging case, the working time is 13.5 hours.

  • Px7 S2

    Headphones

    B&W (Bowers & Wilkins) Px7 S2

    The Px7 S2 model, made in classic black, is equipped with a pair of 40 mm dynamic drivers made of cellulose. The distortion factor is less than 0.1%. A full battery charge is enough for 30 hours of operation, and 15 minutes of mains power gives 7 hours of listening to your favorite music tracks.

hifiverse