Fyne Audio F1-5
Image source — © Fyne Audio
Model name
F1-5
Frequency Response low +/- 3dB (Hz)
48
Frequency Response high +/- 3dB (Hz)
38 000
Sensitivity (dB at 1 W/1m)
87
Impedance (Ohms)
8
Power amplifier requirements (W)
30 - 100
Has internal amplification
N/A
Internal amplification power (W)
N/A
Size (sm)
32.1 x 18.6 x 28.9
Weight (kg)
5.7
Official link
The elegant streamlined body of the Vintage Five is only 35 cm high, with modern proportions and rounded corners, it has a unique retro fleur of the 60s of the last century, accentuated by the tweed pattern of the protective and decorative mesh fabric. This grid hides only one small speaker with a diameter of 125 mm, but which contains two drivers: a regular woofer/The MF and the dome HF hidden in its magnetic system.
Using a 200mm (8”) vintage classic IsoFlare with FyneFlute roll surround sound and a proven 25mm magnesium dome compression tweeter, this luxurious retro design integrates a smaller form factor BassTrax transfer system, delivering phenomenal bass from a relatively compact body. Decorated with a vintage classic woven fabric grille, the Fine Audio Vintage Classic VIII will easily fit into any room.
The model has an IsoFlare emitter, which combines a 20-centimeter bass/midrange driver with a compression tweeter with a 2.5 cm diameter dome made of magnesium.
The Fyne Audio F701 is a bookshelf two-way speaker designed for home use. The Bass trans Port System bass reflex port is built into the bottom of the cabinet. The crossover separation filter includes silver-plated Van den Hul conductors, inductors with minimal losses and Claritycap capacitors.
The F700 bookshelf speaker is equipped with a 150mm IsoFlare point source driver with a BassTrax LF diffuser. The bass driver loads the lower port of the bass reflex.