Hifiverse

Bookshelf Speakers — Diapason KARIS III

Description, images, technical data and specifications

Diapason KARIS III
Image source — © Diapason

The main driver of the model is manufactured by Seas according to Diapason specifications and is equipped with a polypropylene transparent diffuser with a diameter of 110 mm. The high-frequency driver is also made by Seas, its 19 mm dome on a wide suspension provides a more uniform radiation pattern and helps to better work out the smallest details of the musical signal. The crossover is mounted on a board of increased thickness, mounted inside the case directly on the acoustic terminals.

Specifications

  • Model name

    KARIS III

  • Frequency Response low +/- 3dB (Hz)

    60

  • Frequency Response high +/- 3dB (Hz)

    20 000

  • Sensitivity (dB at 1 W/1m)

    87

  • Impedance (Ohms)

    8

  • Power amplifier requirements (W)

    25 - 75

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    19.0 x 26.0 x 28.5

  • Weight (kg)

    4.5

  • Official link

    https://www.diapason-italia.com/en/karisIII.html

Diapason ADAMANTES V

More components

  • ADAMANTES V

    Bookshelf Speakers

    Diapason ADAMANTES V

    The Diapason Direct Drive system in ADAMANTES V allows you to use a 170mm woofer/midrange driver without a separation filter, which gives a lively and natural sound. The parameter left and right values are measured and selected with a spread of less than 0.1% - the key to accurate localization of sound images.

  • KARIS WAVE

    Bookshelf Speakers

    Diapason KARIS WAVE

    The two drivers of the model are covered with large-mesh grills made of acoustically inert metal material. A 2-cm tweeter with a soft silk diaphragm impregnated with a special compound is responsible for the upper case.

  • ÀSTERA

    Bookshelf Speakers

    Diapason ÀSTERA

    The RF driver this model has a soft dome with a diameter of 29 mm, an effective Hexadym magnetic system, double damping and ventilation holes in the housing to eliminate the danger of overheating of the sound coil. The woofer is equipped with a 180 mm diffuser made of paper with a special Nextel impregnation, and is mounted in a cast metal basket. The bass is acoustically loaded onto a bass reflex with an outlet on the back panel.

hifiverse