Diapason KARIS WAVE
Image source — © Diapason
Model name
KARIS WAVE
Frequency Response low +/- 3dB (Hz)
60
Frequency Response high +/- 3dB (Hz)
20 000
Sensitivity (dB at 1 W/1m)
87
Impedance (Ohms)
8
Power amplifier requirements (W)
N/A
Has internal amplification
N/A
Internal amplification power (W)
N/A
Size (sm)
19.0 x 26.0 x 28.5
Weight (kg)
4.5
Official link
The main driver of the model is manufactured by Seas according to Diapason specifications and is equipped with a polypropylene transparent diffuser with a diameter of 110 mm. The high-frequency driver is also made by Seas, its 19 mm dome on a wide suspension provides a more uniform radiation pattern and helps to better work out the smallest details of the musical signal. The crossover is mounted on a board of increased thickness, mounted inside the case directly on the acoustic terminals.
The Diapason Direct Drive system in ADAMANTES V allows you to use a 170mm woofer/midrange driver without a separation filter, which gives a lively and natural sound. The parameter left and right values are measured and selected with a spread of less than 0.1% - the key to accurate localization of sound images.
The RF driver this model has a soft dome with a diameter of 29 mm, an effective Hexadym magnetic system, double damping and ventilation holes in the housing to eliminate the danger of overheating of the sound coil. The woofer is equipped with a 180 mm diffuser made of paper with a special Nextel impregnation, and is mounted in a cast metal basket. The bass is acoustically loaded onto a bass reflex with an outlet on the back panel.