JM Reynaud LUCIA
Image source — © JM Reynaud
Model name
LUCIA
Frequency Response low +/- 3dB (Hz)
65
Frequency Response high +/- 3dB (Hz)
18 000
Sensitivity (dB at 1 W/1m)
85
Impedance (Ohms)
6
Power amplifier requirements (W)
20 - 100
Has internal amplification
N/A
Internal amplification power (W)
N/A
Size (sm)
18 × 23 × 37
Weight (kg)
7.5
Official link
The acoustic load is made in the form of four interconnected volumes that provide gradual absorption of the back radiation of the diffuser. The latter is equipped with a complex 18 cm diffuser consisting of 7 layers of carbon fiber and polyesteresterketone. In the center there is a phase-leveling insert made of aluminum, the sound coil is wound on a fiberglass frame. The original AST ribbon tweeter is responsible for high frequencies, switched on at 1200 Hz in the first order – 12 dB per octave.
The front panel of the model carries two drivers of the company's own production, the main midrange / woofer driver, measuring 17 cm, is mounted without a single screw using a through bolt mounted on the back wall. The tweeter is equipped with a soft dome with an impregnation diameter of 28 mm. The acoustic design is traditional for the company's products – four consecutive chambers ensure smooth and gradual absorption of back-radiation energy.
The JM Reynaud Folia Jubilee is a compact two—lane model. The tweeter is equipped with a soft dome with a diameter of 25 mm, a boomer membrane made of paper measuring 13 cm. Sensitivity — 86 dB/2 V/1 m, bandwidth — 60 Hz — 22 kHz, nominal/minimum resistance — 6/4 ohms.