Hifiverse

Bookshelf Speakers — ProAc Tablette 10 Signature

Description, images, technical data and specifications

ProAc Tablette 10 Signature
Image source — © ProAc

The Tablette 10s have a completely redesigned design, and they are made in a thin-walled, enclosed, deeply damped enclosure similar to that used for the BBC LS3/5a monitors. This design allows the Tablette 10 to be installed close to the wall, unlike bass reflex models, for which such an installation is not recommended.

Specifications

  • Model name

    Tablette 10 Signature

  • Frequency Response low +/- 3dB (Hz)

    55

  • Frequency Response high +/- 3dB (Hz)

    30 000

  • Sensitivity (dB at 1 W/1m)

    86

  • Impedance (Ohms)

    10

  • Power amplifier requirements (W)

    5 - 50

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    30.5 × 19.1 × 15.9

  • Weight (kg)

    5.5

  • Official link

    https://www.proac-loudspeakers.com/products/tablette-10-signature/

ProAc K1

More components

  • Studio SM100

    Bookshelf Speakers

    ProAc Studio SM100

    The Studio SM100 speakers are equipped with a new 165 mm woofer with a basket of a new design, which was developed by ProAc, with higher linearity characteristics and increased allowable input power. The rubber suspension of the new bass diffuser is not afraid of high ambient humidity, which made the Studio SM100 even more reliable.

  • RESPONSE D2

    Bookshelf Speakers

    ProAc RESPONSE D2

    The compact speakers of the ProAc Response D2 are made in full accordance with the glorious traditions of their legendary predecessors. They are shelf-mounted (or rather, mounted on special acoustic racks) loudspeakers with a two-band configuration and acoustic design "phase inverter". The speakers are equipped with a 25 mm silk tweeter and a 165 mm woofer with a conical fiberglass diaphragm and a copper phase-leveling cone - "bullet".

  • Response DB1

    Bookshelf Speakers

    ProAc Response DB1

    The D1 speaker housings are made slightly narrower compared to the Response 1SC, which makes it possible to more effectively combat phase distortion and improve sound dispersion. The new damping material used made the case heavier and more acoustically inert. The new low-frequency drivers are similar to those used in the Response D Two model, have a massive profiled basket and a diffuser made of the same woven material.

  • K1

    Bookshelf Speakers

    ProAc K1

    The ProcK1 uses 6.5' Kevlar midrange/woofer drivers and the developer's favorite ribbon tweeter. The acoustic housings are maximally damped, and there is also a system of internal fins for damping resonances.

hifiverse