Floorstanding loudspeakers — Børresen Acoustics Børresen 05 Cryo Edition

More components

• 

  Floorstanding loudspeakers

  Børresen Acoustics C3

  The Børresen C3 speaker cabinets are made from a combination of reinforced wood composite and carbon fiber panels and are reinforced with 5 mm wooden braces, which optimizes structural integrity. The system operates in a semi-open mode at midrange frequencies.

• 

  Floorstanding loudspeakers

  Børresen Acoustics C2

  Børresen C2 are equipped with a Børresen DCC5 Neo bass and midrange driver. This driver uses a neodymium magnet system with double copper caps to minimize electromagnetic resonance and induction. The DCC5 Neo is equipped with a three-layer diffuser made of aramid honeycomb core and a carbon fiber shell. The drivers are characterized by negligible resonance levels, which significantly increases the level of details.

• 

  Floorstanding loudspeakers

  Børresen Acoustics Børresen X6

  The acoustic systems are based on all the knowledge gained during the creation of the M, 0 and Z series. This is why you will find components from these exclusive series in the Børresen X series, such as the brand new carbon fiber Spread-tow membrane, the famous Børresen band-pass tweeter, and the use of copper sheaths in the magnetic motor system.

• 

  Floorstanding loudspeakers

  Børresen Acoustics Børresen X3

  The X3 dynamic head diffuser consists of three layers laminated into a single whole – two layers of carbon fiber with a layer of aramid honeycombs between them. As a result, it was possible to achieve high rigidity of the diffuser with a low weight of the movable structure.

• 

  Floorstanding loudspeakers

  Børresen Acoustics Børresen X2

  The Børresen X2 floorstanding loudspeakers use a proprietary ribbon tweeter, which is used by the rest of the X-series models. In addition, the new product features two 4.5-inch drivers with carbon diffusers, the same as in other X-series speakers.