Hifiverse

Floorstanding loudspeakers — Børresen Acoustics Børresen X3

Description, images, technical data and specifications

Børresen Acoustics Børresen X3
Image source — © Børresen Acoustics

The X3 dynamic head diffuser consists of three layers laminated into a single whole – two layers of carbon fiber with a layer of aramid honeycombs between them. As a result, it was possible to achieve high rigidity of the diffuser with a low weight of the movable structure.

Specifications

  • Model name

    Børresen X3

  • Frequency Response low +/- 3dB (Hz)

    35

  • Frequency Response high +/- 3dB (Hz)

    50000

  • Sensitivity (dB at 1 W/1m)

    88

  • Impedance (Ohms)

    4

  • Power amplifier requirements (W)

    >50

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    129 x 34.5 x 60.7

  • Weight (kg)

    55

  • Official link

    https://audiogroupdenmark.com/product/boerresen-x3/

Børresen Acoustics Børresen X2

Børresen Acoustics Børresen X6

More components

  • C3

    Floorstanding loudspeakers

    Børresen Acoustics C3

    The Børresen C3 speaker cabinets are made from a combination of reinforced wood composite and carbon fiber panels and are reinforced with 5 mm wooden braces, which optimizes structural integrity. The system operates in a semi-open mode at midrange frequencies.

  • C2

    Floorstanding loudspeakers

    Børresen Acoustics C2

    Børresen C2 are equipped with a Børresen DCC5 Neo bass and midrange driver. This driver uses a neodymium magnet system with double copper caps to minimize electromagnetic resonance and induction. The DCC5 Neo is equipped with a three-layer diffuser made of aramid honeycomb core and a carbon fiber shell. The drivers are characterized by negligible resonance levels, which significantly increases the level of details.

  • Børresen X6

    Floorstanding loudspeakers

    Børresen Acoustics Børresen X6

    The acoustic systems are based on all the knowledge gained during the creation of the M, 0 and Z series. This is why you will find components from these exclusive series in the Børresen X series, such as the brand new carbon fiber Spread-tow membrane, the famous Børresen band-pass tweeter, and the use of copper sheaths in the magnetic motor system.

  • Børresen X2

    Floorstanding loudspeakers

    Børresen Acoustics Børresen X2

    The Børresen X2 floorstanding loudspeakers use a proprietary ribbon tweeter, which is used by the rest of the X-series models. In addition, the new product features two 4.5-inch drivers with carbon diffusers, the same as in other X-series speakers.

  • Børresen M6

    Floorstanding loudspeakers

    Børresen Acoustics Børresen M6

    In the M6, the Børresen brand uses iron-free magnetic system drivers in all of its speaker systems.Their inductance is about ten times lower than that of conventional drivers. This exceptionally low inductance in the M6 has been further reduced to an unprecedented level – about 12 times lower than the inductance level of conventional iron-based drivers.

hifiverse