Floorstanding loudspeakers — Børresen Acoustics C2

More components

• 

  Floorstanding loudspeakers

  Børresen Acoustics C3

  The Børresen C3 speaker cabinets are made from a combination of reinforced wood composite and carbon fiber panels and are reinforced with 5 mm wooden braces, which optimizes structural integrity. The system operates in a semi-open mode at midrange frequencies.

• 

  Floorstanding loudspeakers

  Børresen Acoustics Børresen X6

  The acoustic systems are based on all the knowledge gained during the creation of the M, 0 and Z series. This is why you will find components from these exclusive series in the Børresen X series, such as the brand new carbon fiber Spread-tow membrane, the famous Børresen band-pass tweeter, and the use of copper sheaths in the magnetic motor system.

• 

  Floorstanding loudspeakers

  Børresen Acoustics Børresen X3

  The X3 dynamic head diffuser consists of three layers laminated into a single whole – two layers of carbon fiber with a layer of aramid honeycombs between them. As a result, it was possible to achieve high rigidity of the diffuser with a low weight of the movable structure.

• 

  Floorstanding loudspeakers

  Børresen Acoustics Børresen X2

  The Børresen X2 floorstanding loudspeakers use a proprietary ribbon tweeter, which is used by the rest of the X-series models. In addition, the new product features two 4.5-inch drivers with carbon diffusers, the same as in other X-series speakers.

• 

  Floorstanding loudspeakers

  Børresen Acoustics Børresen M6

  In the M6, the Børresen brand uses iron-free magnetic system drivers in all of its speaker systems.Their inductance is about ten times lower than that of conventional drivers. This exceptionally low inductance in the M6 has been further reduced to an unprecedented level – about 12 times lower than the inductance level of conventional iron-based drivers.