Hifiverse

Floorstanding loudspeakers — ELAC Concentro 2.0 S509.2

Description, images, technical data and specifications

ELAC Concentro 2.0 S509.2
Image source — © ELAC

The speakers have a four-band configuration, which is also necessary in this market segment. A combined treble/midrange unit is installed in the upper part of the front panel of the ELAC Concentra S509, consisting of a concentrically arranged Jet 5 ribbon tweeter and a treble/midrange driver with a 130 mm aluminum diffuser. At the bottom is a 180mm midrange speaker with the proprietary AS-XR combo diffuser, which reproduces the voice range very accurately and neutrally. Four low-frequency speakers with a diameter of 180 mm are located on the side panels of the ELAC Concentra S 509.

Specifications

  • Model name

    Concentro 2.0 S509.2

  • Frequency Response low +/- 3dB (Hz)

    N/A

  • Frequency Response high +/- 3dB (Hz)

    N/A

  • Sensitivity (dB at 1 W/1m)

    N/A

  • Impedance (Ohms)

    N/A

  • Power amplifier requirements (W)

    N/A

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    N/A

  • Weight (kg)

    N/A

  • Official link

    https://www.elac.com/cfs509-2

ELAC Concentro 2.0 S507.2

ELAC Concentro 2.0 M.2

More components

  • Vela 2.0 VFS409.2

    Floorstanding loudspeakers

    ELAC Vela 2.0 VFS409.2

    The ELAC FS 409.2 floorstanding loudspeaker is equipped with a JET VI ribbon tweeter. The ultralight tape membrane provides an instant response to the received signal, resulting in high sound accuracy. Another advantage of such a Twitter is a very wide frequency range with an upper limit of 50 kHz.

  • Vela 2.0 FS408.2

    Floorstanding loudspeakers

    ELAC Vela 2.0 FS408.2

    The rounded corners of the housing not only give the ELAC FS 408.2 an elegant appearance, but also eliminate sound distortion caused by acoustic wave diffraction.

  • Vela 2.0 FS407.2

    Floorstanding loudspeakers

    ELAC Vela 2.0 FS407.2

    The speaker body is tilted back at a slight angle. This ensures the most consistent sound of the drivers and aligns the stereo picture. The geometry of the case in cross-section is close to a trapezoid, the width of the slightly convex front panel exceeds the width of the rear wall. This solution makes it possible to effectively deal with internal resonances.

  • Solano 2.0 FS287.2

    Floorstanding loudspeakers

    ELAC Solano 2.0 FS287.2

    Compact 2.5-way floorstanding speakers. Low-frequency drivers with a diameter of 150 mm with combined AS diffusers mounted on a cast basket. JET 6 branded AMT ribbon tweeter of the new generation. The crossover is made of selected components.

  • Concentro 2.0 M.2

    Floorstanding loudspeakers

    ELAC Concentro 2.0 M.2

    The model is a three-band design in which the main part of the frequency range is reproduced by a coaxial concentric driver consisting of a JET 5 ribbon radiator and a Ring Radiator midrange driver with an aluminum diffuser of a complex Crystal Membrane profile.

hifiverse