Hifiverse

Floorstanding loudspeakers — ELAC Debut Reference DFR52

Description, images, technical data and specifications

ELAC Debut Reference DFR52
Image source — © ELAC

The ELAC Debut Reference DFR 52 has a three-band configuration and is equipped with two low-frequency drivers. They have a diameter of 5.25 inches, which made it possible to keep the case narrow enough for convenient placement of the speaker in a residential interior.

Specifications

  • Model name

    Debut Reference DFR52

  • Frequency Response low +/- 3dB (Hz)

    42

  • Frequency Response high +/- 3dB (Hz)

    35 000

  • Sensitivity (dB at 1 W/1m)

    87

  • Impedance (Ohms)

    6

  • Power amplifier requirements (W)

    140

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    101.6 × 18.5 × 24.2

  • Weight (kg)

    16.7

  • Official link

    https://www.elac.com/dfr52

ELAC Uni-Fi 2.0 UF52

ELAC UniFi Reference UFR52

More components

  • Vela 2.0 VFS409.2

    Floorstanding loudspeakers

    ELAC Vela 2.0 VFS409.2

    The ELAC FS 409.2 floorstanding loudspeaker is equipped with a JET VI ribbon tweeter. The ultralight tape membrane provides an instant response to the received signal, resulting in high sound accuracy. Another advantage of such a Twitter is a very wide frequency range with an upper limit of 50 kHz.

  • Vela 2.0 FS408.2

    Floorstanding loudspeakers

    ELAC Vela 2.0 FS408.2

    The rounded corners of the housing not only give the ELAC FS 408.2 an elegant appearance, but also eliminate sound distortion caused by acoustic wave diffraction.

  • Vela 2.0 FS407.2

    Floorstanding loudspeakers

    ELAC Vela 2.0 FS407.2

    The speaker body is tilted back at a slight angle. This ensures the most consistent sound of the drivers and aligns the stereo picture. The geometry of the case in cross-section is close to a trapezoid, the width of the slightly convex front panel exceeds the width of the rear wall. This solution makes it possible to effectively deal with internal resonances.

  • Solano 2.0 FS287.2

    Floorstanding loudspeakers

    ELAC Solano 2.0 FS287.2

    Compact 2.5-way floorstanding speakers. Low-frequency drivers with a diameter of 150 mm with combined AS diffusers mounted on a cast basket. JET 6 branded AMT ribbon tweeter of the new generation. The crossover is made of selected components.

  • Concentro 2.0 M.2

    Floorstanding loudspeakers

    ELAC Concentro 2.0 M.2

    The model is a three-band design in which the main part of the frequency range is reproduced by a coaxial concentric driver consisting of a JET 5 ribbon radiator and a Ring Radiator midrange driver with an aluminum diffuser of a complex Crystal Membrane profile.

hifiverse