Hifiverse

Floorstanding loudspeakers — Pylon Audio Opal 30

Description, images, technical data and specifications

Pylon Audio Opal 30
Image source — © Pylon Audio

The design features a new 18-centimeter PSM 18.8 CS midrange driver operating in a separate camera. The cellulose-coated membrane driver is designed with maximum sound uniformity and microdynamics in mind in the most sensitive range. The two PSW 18.8 CS 18 cm woofers provide the perfect base for the rest of the range, delivering a reliable dose of the lowest registers.

Specifications

  • Model name

    Opal 30

  • Frequency Response low +/- 3dB (Hz)

    35

  • Frequency Response high +/- 3dB (Hz)

    20 000

  • Sensitivity (dB at 1 W/1m)

    90

  • Impedance (Ohms)

    4

  • Power amplifier requirements (W)

    100 - 150

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    19.0 × 103.0 × 36.0

  • Weight (kg)

    22

  • Official link

    https://pylon.pl/en/opal-series/opal-30/

Pylon Audio Diamond 25 mkII

Pylon Audio Opal 23

More components

  • Opal 20

    Floorstanding loudspeakers

    Pylon Audio Opal 20

    The smallest floorstanding model in the series, which is not inferior in sound quality to its older brothers.

  • Opal 23

    Floorstanding loudspeakers

    Pylon Audio Opal 23

    The symmetrical driver configuration in the Opal 23 speakers allows you to listen to music even from a short distance, offering a wide sound stage.

  • Diamond 25 mkII

    Floorstanding loudspeakers

    Pylon Audio Diamond 25 mkII

    The Jasper 25 MKII is an updated version of the well–established older Jasper series model. It combines engineering excellence and first-class sound.

  • Diamond 28 mkII

    Floorstanding loudspeakers

    Pylon Audio Diamond 28 mkII

    Due to the slight tilt of the structure, the desired visual effect was achieved, and this was combined with the optimization of the phase dependence that occurs between the speakers. In Diamond 28, the crossover circuit is installed by direct mounting, it uses only polypropylene capacitors. The placement of coils is specially optimized to minimize interference.

  • Diamond 30 mkII

    Floorstanding loudspeakers

    Pylon Audio Diamond 30 mkII

    Pylon Audio Diamond 30 is a floorstanding speakr. The well-known and widely appreciated 19mm silk dome Scan Speak was used in the 3-band configuration, while the midrange reproduces a specialized 15cm Norwegian Seas driver.

hifiverse