Hifiverse

Floorstanding loudspeakers — JM Reynaud ORFEO GRANDE

Description, images, technical data and specifications

JM Reynaud ORFEO GRANDE
Image source — © JM Reynaud

Jean-Marie Reynaud ORFEOG RANDE is characterized by precise tonal balance, clear and dynamic sound pattern, and natural timbres. The model has improved dynamics and filters, used selected and paired components, as well as an exceptional tree.

Specifications

  • Model name

    ORFEO GRANDE

  • Frequency Response low +/- 3dB (Hz)

    30

  • Frequency Response high +/- 3dB (Hz)

    25 000

  • Sensitivity (dB at 1 W/1m)

    91

  • Impedance (Ohms)

    4

  • Power amplifier requirements (W)

    90 - 300

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    118 × 24 × 33

  • Weight (kg)

    45

  • Official link

    https://www.jm-reynaud.com/produit/orfeo-grande/

JM Reynaud ORFEO JUBILE

More components

  • ORFEO JUBILE

    Floorstanding loudspeakers

    JM Reynaud ORFEO JUBILE

    The JM ORFEO JUBILEE is a relatively compact, high—performance 2.5-band floorstanding speaker system with high tonal and energetic qualities.

  • ABCISSE JUBILE

    Floorstanding loudspeakers

    JM Reynaud ABCISSE JUBILE

    ABSCISSE JUBILEE is a compact speaker system designed with the aim of creating a system with a wide frequency range that can be installed in medium—sized rooms with minimal restrictions on placement.

  • CANTABILE JUBILE

    Floorstanding loudspeakers

    JM Reynaud CANTABILE JUBILE

    The Cantabile Jubilee is an floorstanding speaker that offers a spacious, wide and deep sound stage with incredible spatial precision. The recommended amplifier power is 10-200 watts, sensitivity is 91 dB, resistance is 4 ohms, and the frequency range is 35-25,000 Hz.

  • EUTERPE JUBILE

    Floorstanding loudspeakers

    JM Reynaud EUTERPE JUBILE

    The low-frequency driver of this model with a diameter of 17 cm is equipped with a diffuser made of long-fiber cellulose with a special impregnation. The coil is wound with titanium wire, and the magnetic system uses double magnets to increase recoil. The squeaker has a woven dome with a diameter of 28 mm and is loaded onto a small aluminum waveguide. The magnetic system is based on neodymium.

  • LUNNA

    Floorstanding loudspeakers

    JM Reynaud LUNNA

    The JMR Luna is made in a 2.5-band concept, where the bass section works in an acoustic design with a transmission line, the slot port of which is located on the front panel of the case. The internal space of the column is divided by a multitude of partitions in such a way that there is not a single pair of parallel surfaces, which makes it possible to effectively deal with standing waves.

hifiverse