Hifiverse

Floorstanding loudspeakers — ProAc Response D20

Description, images, technical data and specifications

ProAc Response D20
Image source — © ProAc

The new model uses a 165 mm woofer similar to the one installed in the D18, and a dome fabric high-frequency driver as a tweeter. The result is completely new speakers with an expanded sound stage, deep bass, a light and detailed treble range, and a natural midrange.

Specifications

  • Model name

    Response D20

  • Frequency Response low +/- 3dB (Hz)

    28

  • Frequency Response high +/- 3dB (Hz)

    33 000

  • Sensitivity (dB at 1 W/1m)

    88.5

  • Impedance (Ohms)

    8

  • Power amplifier requirements (W)

    20 - 180

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    97.8 × 19.3 × 28.2

  • Weight (kg)

    24

  • Official link

    https://www.proac-loudspeakers.com/products/response-d20-d-r/

ProAc Response DT8

ProAc Response D30S

More components

  • Response D48

    Floorstanding loudspeakers

    ProAc Response D48

    The Response D48 is a completely new speaker system compared to the D40. The ProAc Response D48 is equipped with a completely new midrange/woofer driver with a conical diffuser made of carbon fiber with compressed paper pulp.

  • Response D30S

    Floorstanding loudspeakers

    ProAc Response D30S

    The Response D30 floorstanding towers received a 165 mm diameter driver with a carbon fiber diffuser of the finest weave with a polymer coating on the back and concentric damping rings.

  • Response DT8

    Floorstanding loudspeakers

    ProAc Response DT8

    The design of the latest ProAc Response DT8 floorstanding loudspeakers uses two 6.5-inch drivers. One of them has a diffuser made of proprietary Pu Mica (mica-impregnated cellulose) material and provides powerful and deep bass.

  • K10

    Floorstanding loudspeakers

    ProAc K10

    The case design is enhanced with an 8-inch bassline with a Kevlar diffuser, providing an extended and natural bass response. It is complemented by a mid-frequency ProAc unit with an ultralight 3-inch diaphragm, complemented by a new design wave trap.

  • K6 Signature

    Floorstanding loudspeakers

    ProAc K6 Signature

    The ProAc K6 Signature speakers use the same housing as the K6 model: well-proportioned and slim design. At the same time, the new K6 Signature differs in many ways compared to the K6. Firstly, the driver layout has been redesigned so that the ribbon tweeter is at the level of the listener's ears in a sitting position, and secondly, a new three-inch ProAc midrange driver is used, unlike the two-inch one used in the K6.

hifiverse