ProAc Response D48
Image source — © ProAc
Model name
Response D48
Frequency Response low +/- 3dB (Hz)
20
Frequency Response high +/- 3dB (Hz)
30 000
Sensitivity (dB at 1 W/1m)
90
Impedance (Ohms)
4
Power amplifier requirements (W)
10 - 250
Has internal amplification
N/A
Internal amplification power (W)
N/A
Size (sm)
120.0 × 21.2 × 34.0
Weight (kg)
39
Official link
The Response D30 floorstanding towers received a 165 mm diameter driver with a carbon fiber diffuser of the finest weave with a polymer coating on the back and concentric damping rings.
The new model uses a 165 mm woofer similar to the one installed in the D18, and a dome fabric high-frequency driver as a tweeter. The result is completely new speakers with an expanded sound stage, deep bass, a light and detailed treble range, and a natural midrange.
The design of the latest ProAc Response DT8 floorstanding loudspeakers uses two 6.5-inch drivers. One of them has a diffuser made of proprietary Pu Mica (mica-impregnated cellulose) material and provides powerful and deep bass.
The case design is enhanced with an 8-inch bassline with a Kevlar diffuser, providing an extended and natural bass response. It is complemented by a mid-frequency ProAc unit with an ultralight 3-inch diaphragm, complemented by a new design wave trap.
The ProAc K6 Signature speakers use the same housing as the K6 model: well-proportioned and slim design. At the same time, the new K6 Signature differs in many ways compared to the K6. Firstly, the driver layout has been redesigned so that the ribbon tweeter is at the level of the listener's ears in a sitting position, and secondly, a new three-inch ProAc midrange driver is used, unlike the two-inch one used in the K6.