Volti Audio RIVAL
Image source — © Volti Audio
Model name
RIVAL
Frequency Response low +/- 3dB (Hz)
32
Frequency Response high +/- 3dB (Hz)
20 000
Sensitivity (dB at 1 W/1m)
100
Impedance (Ohms)
6
Power amplifier requirements (W)
3 - 100
Has internal amplification
N/A
Internal amplification power (W)
N/A
Size (sm)
N/A
Weight (kg)
N/A
Official link
The Volti Audio Razz Limited Edition (RazzLE) differs from the original model in appearance: the front panel is covered with veneer, without a grill. At the same time, the sound quality and the case design are identical.
Razz — three-way speakers with a bass reflex and horn design of a mid-frequency radiator. The low-frequency part of the spectrum is assigned to a 12-inch driver loaded onto the slot port of the phase inverter located on the front wall of the housing. This arrangement of the bass reflex port facilitates the installation of speakers — if necessary, they can be placed close to the wall.
The main parameter and brand feature of the new product is its high sensitivity. 99 dB is claimed. In comparison with the common Odnoklassniki indicator — 86 dB — it turns out that Lucera, all other things being equal, sound about twice as loud by ear.
The Volti Audio Vittora is a three-way, fully horn speaker with a sensitivity of 104 dB and a frequency response extending from 50 Hz to 20 kHz and a resistance of 8 ohms. The manufacturer recommends using speakers with an amplifier with a power from 0.5 to 200 watts.