Fyne Audio VINTAGE TEN
Image source — © Fyne Audio
Model name
VINTAGE TEN
Frequency Response low +/- 3dB (Hz)
26
Frequency Response high +/- 3dB (Hz)
26 000
Sensitivity (dB at 1 W/1m)
94
Impedance (Ohms)
8
Power amplifier requirements (W)
20 - 280
Has internal amplification
N/A
Internal amplification power (W)
N/A
Size (sm)
104.0 x 46.8 x 48.9
Weight (kg)
54.6
Official link
Fyne Audio Vintage Twelve is a 2–way monitor-type floorstanding speaker with a downward-pointing bass reflex in a classic style
The flagship of the classic Vintage Fifteen series takes 100% advantage of the new IsoFlare coaxial driver with a diameter of 380 mm (15 inches), and there are many such advantages.
The design feature of the Classic XII case is two internal sections of the phase reflex system. The first section is a conventional 4th-order resonator connected to the main body through a tube, but its outlet is loaded onto a special 360-degree divider in the lower section, which evenly distributes the wave front in all directions through the bottom of the speaker body.
If you remove the tweed fabric safety net (also a sign of retro), then we will see only one driver on the front panel of the Classic X. This is an absolute advantage of Fyne Audio's proprietary technical solution, the IsoFlare coaxial woofer/RF emitter (details below). Another interesting decoration of the front panel is the smooth controls of the amplitude—frequency response in the midrange and treble areas (they are also described below).
The Classic VIII is smaller in size than other Classic series floorstanding speakers (XII and X) and can be used in relatively small spaces. The manufacturer recommends the distance between the right and left speakers in the range from 1.5 to 4.5 meters.