Hifiverse

Subwoofers — Wilson Audio Submerge

Description, images, technical data and specifications

Wilson Audio Submerge
Image source — © Wilson Audio

The Wilson Audio Submerge active subwoofer is based on a 12-inch dual-coil woofer driver specifically designed for this model. The speaker has been optimized to reproduce the two lowest octaves of the frequency spectrum audible to humans, and operates in a phase–inverted design - the slot port of the phase inverter is located in the lower part of the front panel.

Specifications

  • Model name

    Submerge

  • Frequency Response low +/- 3dB (Hz)

    5

  • Frequency Response high +/- 3dB (Hz)

    500

  • Sensitivity (dB at 1 W/1m)

    N/A

  • Impedance (Ohms)

    N/A

  • Has internal amplification

    Yes

  • Power amplifier requirements (W)

    1600

  • Size (sm)

    45.72 × 62.41 × 60.43

  • Weight (kg)

    N/A

  • Official link

    https://www.wilsonaudio.com/products/submerge/submerge

Wilson Audio LōKē

Wilson Audio Audio Subsonic

More components

  • Audio Subsonic

    Subwoofers

    Wilson Audio Audio Subsonic

    The Subsonic is the perfect complement to any of Wilson's medium or large floor-mounted speakers configured as a single unit or as a two-channel stereo pair. In any configuration, it offers performance in the 10-30 Hz range, which is surpassed only by the WAMM Master Subsonic itself.

  • LōKē

    Subwoofers

    Wilson Audio LōKē

    The model has a dual ActivXO branded subwoofer crossover with all the basic functions — adjusting not only the frequency, but also the steepness of the cutoff, and, of course, the level. The ten-inch Lōkē speaker provides the subwoofer with a low-frequency limit of 30 Hz.

hifiverse