Subwoofers — ELAC Varro DS1000-GB
Description, images, technical data and specifications
ELAC Varro DS1000-GB
Image source — © ELAC
Specifications
Model name
Varro DS1000-GB
Frequency Response low +/- 3dB (Hz)
15
Frequency Response high +/- 3dB (Hz)
150
Sensitivity (dB at 1 W/1m)
N/A
Impedance (Ohms)
N/A
Has internal amplification
Yes
Power amplifier requirements (W)
2000
Size (sm)
37.1 × 42.9 × 37.0
Weight (kg)
32.4
Official link
More components
Subwoofers
ELAC Muro SUB2020
The ELAC Muro Sub2020 is made in a damped MDF housing, which can have black or white finishes. A low-frequency driver with a diameter of 10 inches is mounted on the side panel of the subwoofer, equipped with a lightweight and rigid polypropylene diffuser. The speaker is covered with a metal safety net that prevents accidental damage and at the same time ensures the free passage of sound waves.
Subwoofers
ELAC Muro SUB2010
The ELAC SUB 2010 is equipped with an 8-inch diameter woofer with an impregnated paper diffuser and a powerful magnetic system. This radiator is located on the side wall of the subwoofer housing, which is completely enclosed by a metal safety net. The bass is acoustically loaded onto a bass reflex, the outlet of which is located on the front panel of the case.
Subwoofers
ELAC Varro SUB2070.2
The subwoofer has two low-frequency drivers with a diameter of 250 mm, operating in common mode for a total internal enclosed volume. One of the speakers is pointing down and the other is pointing up, and both have a fixed acoustic load in the form of panels mounted at a certain distance in front of the diffusers. These panels, working as reflectors, ensure a uniform distribution of bass in the listening room.
Subwoofers
ELAC Varro DS1200-GB
The subwoofer has two low-frequency drivers with a diameter of 12 inches, manufactured using a patented technology. It involves the use of a combined diffuser made of paper and aluminum, mounted on a suspension of unusual Hex geometry. The advantage of the latter is the possibility of linear displacement of the diaphragm with a large amplitude, which is a prerequisite for obtaining a convincing sound pressure.
Subwoofers
ELAC Varro RS700-SB
The subwoofer body is made of MDF panels of considerable thickness and is additionally reinforced with internal ties. Thanks to this, it was possible to completely extinguish vibrations and resonances and eliminate the sound distortions caused by them. A 12-inch diameter woofer is mounted on the front panel. The driver has a patented design for increased sound output and deep bass.
