Luxman D-03R – New CD Player With External DSD-DAC Function
A new CD player Luxman D-03R has been announced – the model will replace the previous version D-03X. Luxman D-03R can work both as a disc player and as an external digital-to-analog converter – the heart of the device is High-End ROHM DB34352EKV chips in a dual mono configuration.
Luxman D-03R can work with signals up to PCM up to 32 bit / 384 kHz and DSD up to 22.5 MHz. The MQA format is supported, including MQA-CD. The Trinity transport mechanism with a 3.2 mm steel base and an offset center of gravity reliably dampens vibrations and provides excellent mechanical stability of the drive.
On the front panel of the device there is an OLED display of considerable clarity with a four-stage dimmer, with which you can control the playback parameters.
The power supply is, of course, large-sized with a 6,600 mF capacitor unit. The device comes with a high-quality branded power cable Luxman JPA-100000i and an aluminum remote control.
Specifications
This product is in the Hi-Fi and High End Electronics and Acoustics database
CD / SACD players and transports — Luxman D-03R
Model name
D-03R
Transport
Yes
Player
Yes
SACD support
N/A
Engine
BD34352EKV ROHM x 2
Frequency response low +/- 3dB (for CD) (Hz)
5
Frequency response high +/- 3dB (for CD) (Hz)
20000
Frequency response low +/- 3dB (for SACD) (Hz)
N/A
Frequency response high +/- 3dB (for SACD) (Hz)
N/A
Gain (dBu)
N/A
Output Level (balanced) (V)
2.4
Output Level (single-ended) (V)
2.4
Input Impedance (balanced) (Ω)
N/A
Input Impedance (single-ended) (Ω)
N/A
Output Impedance (balanced) (Ω)
600
Output Impedance (single-ended) (Ω)
300
Dynamic range (for CD) (dB)
N/A
Dynamic range (for SACD) (dB)
N/A
Signal to Noise Ratio (for CD) (dB)
110
Signal to Noise Ratio (for SACD) (dB)
N/A
Total Harmonic Distortion + Noise (for CD) (%)
0.002
Total Harmonic Distortion + Noise (for SACD) (%)
N/A
Dimensions (mm)
440 x 133 x 410
Weight (kg)
13.2
Official link
More content
Stratton Acoustics Element 6 and Element 8 – Acoustics with Patented Tweeters
Stratton Acoustics has introduced two models of compact bookshelf loudspeakers – Element 6 and Element 8. Both speakers use the company’s patented soft dome tweeters with a diameter of 29 mm, equipped with a waveguide to provide wide sound dispersion. The models are hand-assembled at the company’s own factory in England.
SMSL VMV A1 Pro - Integrated Amplifier on GaN FET Transistors
The SMSL company presented the SMSL VMV A1 Pro power amplifier - using lnfineon's latest GaN FET transistors, with a switching frequency of up to 1 MHz. Such unique circuitry guarantees, according to the company, absolutely natural sound and up to 400 W of output power.
Treehaus Audiolab LCR Phono – a Vacuum Tube Phonostage with Passive Equalization
Treehaus Audiolab has announced the Treehaus Audiolab LCR Phono reference vacuum tube phono preamplifier. To equalize the signal, the device uses only passive components: inductors (L), capacitors (C) and resistors (R).
Rotel DX-5 – a Tiny Amplifier Operating in Class A/B
Rotel DX-5 is a compact model, but despite its dimensions, the device does not use digital amplification and operates in class A/B, reaching 2 x 33 W into 4 Ohm load and 2 x 25 W into 8 Ohm speakers. The new product is equipped with a power supply based on a powerful toroidal transformer created by Rotel itself, and high-current transistors.
TOTALDAC d1-total – a Fully “Packed” DAC and Streamer
The Totaldac d1-total digital-to-analog converter has been introduced – according to the company, this device guarantees the maximum possible for a single-block design with external PSU. “Under the hood”, in addition to the d1-triunity DAC converter, there is also volume control, a network streamer (latest version developed for the d1-streamer-live), 40 femtoseconds oscillators, a microfilter USB loop (developed for the d1-streamer-live) and anti-vibration supports.
