Woo Audio WA24 20th Anniversary Edition – Tube Headphone Amplifier
08.02.2025 06:41 | ~1 minute read
Woo Audio has unveiled the anniversary version of the Woo Audio WA24 20th Anniversary Edition reference tube headphone amplifier. Each element of the WA24 20th Anniversary Edition has been carefully selected to achieve the highest sound quality. The amplifier is based on four custom-made 3A/109E vacuum triodes with medium gain and direct heating, chosen for their low noise and durability. The single-ended topology of the amplifier provides the highest gain, and the oversized output transformer - the highest power and dynamic range for even the most complex headphones.
The model operates in the frequency response from 10 to 40,000 Hz and is suitable for working with headphones with an impedance of 8 - 600 Ohms and a sensitivity of 74 - 120 dB. For connection, there are balanced outputs (4-pin XLR and 4.4 mm Pentaconn) and unbalanced - 6.3 mm and 3.5 mm.
Woo Audio WA24 20th Anniversary Edition is equipped with a precision step-up transformer STEP-UP, using a nanocrystalline core and oxygen-free copper wiring. Replacing traditional active components such as vacuum tubes or transistors, it simplifies the amplifier circuit, reduces interference and significantly improves performance. The two-tier chassis of the Woo Audio WA24 20th Anniversary Edition, made from a solid aluminum billet. Each amplifier section is housed in a separate shielded case.
The Woo Audio WA24 20th Anniversary Edition tube headphone amplifier is available at a price of $ 12,999.
Specifications
This product is in the Hi-Fi and High End Electronics and Acoustics database
Headphones amplifiers — Woo Audio WA24 20th Anniversary Edition
Model name
WA24 20th Anniversary Edition
Maximum Power, 32 Ohms (mW RMS per channel)
N/A
Maximum Power, 50 Ohms (mW RMS per channel)
N/A
Maximum Power, 300 Ohms (mW RMS per channel)
N/A
Maximum Power, 600 Ohms (mW RMS per channel)
N/A
Frequency response low +/- 3dB (Hz)
10
Frequency response high +/- 3dB (Hz)
40000
Gain (dBu)
N/A
THD (% at 1V RMS, 300 ohms)
N/A
Signal to Noise Ratio (dB)
N/A
IMD (%, CCIR, 300 Ohms)
N/A
Crosstalk (dB, 20Hz-20KHz, 300 Ohms)
N/A
Output Impedance (Ohms)
N/A
Dimensions (mm)
390 x 270 x 197
Weight (g)
17
Official link
More content
Stratton Acoustics Element 6 and Element 8 – Acoustics with Patented Tweeters
Stratton Acoustics has introduced two models of compact bookshelf loudspeakers – Element 6 and Element 8. Both speakers use the company’s patented soft dome tweeters with a diameter of 29 mm, equipped with a waveguide to provide wide sound dispersion. The models are hand-assembled at the company’s own factory in England.
SMSL VMV A1 Pro - Integrated Amplifier on GaN FET Transistors
The SMSL company presented the SMSL VMV A1 Pro power amplifier - using lnfineon's latest GaN FET transistors, with a switching frequency of up to 1 MHz. Such unique circuitry guarantees, according to the company, absolutely natural sound and up to 400 W of output power.
Treehaus Audiolab LCR Phono – a Vacuum Tube Phonostage with Passive Equalization
Treehaus Audiolab has announced the Treehaus Audiolab LCR Phono reference vacuum tube phono preamplifier. To equalize the signal, the device uses only passive components: inductors (L), capacitors (C) and resistors (R).
Rotel DX-5 – a Tiny Amplifier Operating in Class A/B
Rotel DX-5 is a compact model, but despite its dimensions, the device does not use digital amplification and operates in class A/B, reaching 2 x 33 W into 4 Ohm load and 2 x 25 W into 8 Ohm speakers. The new product is equipped with a power supply based on a powerful toroidal transformer created by Rotel itself, and high-current transistors.
TOTALDAC d1-total – a Fully “Packed” DAC and Streamer
The Totaldac d1-total digital-to-analog converter has been introduced – according to the company, this device guarantees the maximum possible for a single-block design with external PSU. “Under the hood”, in addition to the d1-triunity DAC converter, there is also volume control, a network streamer (latest version developed for the d1-streamer-live), 40 femtoseconds oscillators, a microfilter USB loop (developed for the d1-streamer-live) and anti-vibration supports.
