Bookshelf Speakers

The ATM tweeter and an additional 8-inch driver made using anodized aluminum are responsible for the sound in the speakers.

Leonore is an elegant bookshelf speaker with an inch ATM tweeter and a 6.5-inch driver for low and midrange frequencies.

The female-named model received an ATM inch tweeter and a pair of 6.5-inch drivers that use paper fiber in their design.

The body of the Kroma Audio Mimi is made entirely of Krion composite material, and the side panels are finished with carbon inserts. An interesting detail is that there is not a single metal screw in the entire structure.

The Diana I model features an inch silk dome tweeter and a 6.5-inch midrange driver with a fiberglass diffuser. The sensitivity of the speaker is 88 dB.

The Diana II, with its symmetrical driver configuration, is equipped with two 6.5-inch midrange drivers with diffusers made of specially treated paper. The sensitivity of the speaker is 91 dB.

The Yamaha NS-600A uses innovative RS (Resonance Suppression) chambers located at the rear of the tweeter to solve the problem of resonances - they provide accurate transmission of the smallest details of the sound of musical instruments and vocals. Two specially calculated tubes effectively suppress resonances arising behind the diffuser.

The loudspeakers has a three-way design - a 2.5-cm tweeter with a beryllium diaphragm and a 9-cm midrange driver. The drivers are combined into a coaxial CST (Coherent Source Transuder) assembly. They are complemented by a 16-cm woofer with a multilayer composite MACC diffuser, which is made of woven aramid fibers and non-woven materials. The TAD ME1TX operates in the frequency range from 36 Hz to 62,000 Hz.

The elegant streamlined body of the Vintage Five is only 35 cm high, with modern proportions and rounded corners, it has a unique retro fleur of the 60s of the last century, accentuated by the tweed pattern of the protective and decorative mesh fabric. This grid hides only one small speaker with a diameter of 125 mm, but which contains two drivers: a regular woofer/The MF and the dome HF hidden in its magnetic system.

Using a 200mm (8”) vintage classic IsoFlare with FyneFlute roll surround sound and a proven 25mm magnesium dome compression tweeter, this luxurious retro design integrates a smaller form factor BassTrax transfer system, delivering phenomenal bass from a relatively compact body. Decorated with a vintage classic woven fabric grille, the Fine Audio Vintage Classic VIII will easily fit into any room.

The model has an IsoFlare emitter, which combines a 20-centimeter bass/midrange driver with a compression tweeter with a 2.5 cm diameter dome made of magnesium.

The Fyne Audio F701 is a bookshelf two-way speaker designed for home use. The Bass trans Port System bass reflex port is built into the bottom of the cabinet. The crossover separation filter includes silver-plated Van den Hul conductors, inductors with minimal losses and Claritycap capacitors.

The F700 bookshelf speaker is equipped with a 150mm IsoFlare point source driver with a BassTrax LF diffuser. The bass driver loads the lower port of the bass reflex.

Fyne Audio F5E — bookshelf speakers from the F500E series of budget acoustics. They feature a 5-inch IsoFlare driver and an ambient FyneFlute driver for accurate stereo imaging and detailed sound.

A 15-cm midrange/woofer IsoFlare driver is installed inside. The diffuser uses a FyneFlute roller suspension for better heat dissipation. The die-cast aluminum housing housing the diffuser contains a magnet that focuses the flow to increase efficiency at low frequencies. The 2.5cm tweeter with waveguide is borrowed from the F700 model.

A distinctive feature is the use of a Tractrix diffuser, thanks to which the woofers spread evenly throughout the room. This allows you to install the device in any part of the room without the risk of reducing the fidelity of playback. The audio frequency separation filter includes induction coils with multilayer cores and polypropylene capacitors.

Two–way systems are designed according to the classical phase-reversal scheme with the port output backwards (so that the speaker cannot be installed close to the walls, it is necessary to step back 40-50 cm). The input power can reach 100 watts, the speakers themselves will "start up" from 25 Watts – the resistance is stated at 8 ohms, the sensitivity is 89 dB, the load is not complicated.

Acoustic systems are versatile in use: they can be used on racks, on furniture shelves, on a wall bracket, as well as as stereo or front or rear channels of a home theater.

In Fine Audio F1-8, the corresponding drivers sizes are 8 inches and 25 mm. The bass diffusers are mounted on suspensions with the proprietary FyneFlute profile, the baskets are made of cast aluminum, and the magnets are made of ferrite.

In the Fine Audio F1-5 model, the midrange woofer has a diameter of 5 inches, and the tweeter located deep in the mouth is equipped with a magnesium alloy dome with a diameter of 19 mm.