Bookshelf Speakers

The Studio SM100 speakers are equipped with a new 165 mm woofer with a basket of a new design, which was developed by ProAc, with higher linearity characteristics and increased allowable input power. The rubber suspension of the new bass diffuser is not afraid of high ambient humidity, which made the Studio SM100 even more reliable.

The compact speakers of the ProAc Response D2 are made in full accordance with the glorious traditions of their legendary predecessors. They are shelf-mounted (or rather, mounted on special acoustic racks) loudspeakers with a two-band configuration and acoustic design "phase inverter". The speakers are equipped with a 25 mm silk tweeter and a 165 mm woofer with a conical fiberglass diaphragm and a copper phase-leveling cone - "bullet".

The D1 speaker housings are made slightly narrower compared to the Response 1SC, which makes it possible to more effectively combat phase distortion and improve sound dispersion. The new damping material used made the case heavier and more acoustically inert. The new low-frequency drivers are similar to those used in the Response D Two model, have a massive profiled basket and a diffuser made of the same woven material.

The ProcK1 uses 6.5' Kevlar midrange/woofer drivers and the developer's favorite ribbon tweeter. The acoustic housings are maximally damped, and there is also a system of internal fins for damping resonances.

The Tablette 10s have a completely redesigned design, and they are made in a thin-walled, enclosed, deeply damped enclosure similar to that used for the BBC LS3/5a monitors. This design allows the Tablette 10 to be installed close to the wall, unlike bass reflex models, for which such an installation is not recommended.

The PS Audio Aspen FR5 is a two-way bookshelf speaker with a 2.5-inch flat tweeter with a Teonex diaphragm and a 6.5-inch woofer, characterized by low distortion and a long travel diffuser made of woven polypropylene fibers. In addition, it uses a passive 6 x 9-inch long-stroke driver for confident deep bass reproduction.

The main driver of the model is manufactured by Seas according to Diapason specifications and is equipped with a polypropylene transparent diffuser with a diameter of 110 mm. The high-frequency driver is also made by Seas, its 19 mm dome on a wide suspension provides a more uniform radiation pattern and helps to better work out the smallest details of the musical signal. The crossover is mounted on a board of increased thickness, mounted inside the case directly on the acoustic terminals.

The Diapason Direct Drive system in ADAMANTES V allows you to use a 170mm woofer/midrange driver without a separation filter, which gives a lively and natural sound. The parameter left and right values are measured and selected with a spread of less than 0.1% - the key to accurate localization of sound images.

The two drivers of the model are covered with large-mesh grills made of acoustically inert metal material. A 2-cm tweeter with a soft silk diaphragm impregnated with a special compound is responsible for the upper case.

The RF driver this model has a soft dome with a diameter of 29 mm, an effective Hexadym magnetic system, double damping and ventilation holes in the housing to eliminate the danger of overheating of the sound coil. The woofer is equipped with a 180 mm diffuser made of paper with a special Nextel impregnation, and is mounted in a cast metal basket. The bass is acoustically loaded onto a bass reflex with an outlet on the back panel.

The speaker system has a two-way configuration. It has a 152 mm diameter woofer and a 25 mm dome tweeter. The bass driver was designed specifically for these speakers, which ensured its precise alignment with the body. The bass diffuser is able to move linearly with high amplitude and speed, creating impressive sound pressure.

The 170 mm midrange/woofer in this model is resistant to high loads, the midrange is worked out vividly, with reactive dynamics and gives out a large number of details and nuances. The operating range of the high-frequency emitter goes beyond the limits of audible boundaries and reaches up to 30 kHz, providing the listener with airy iridescent tops, precise and fast, without any traces of sharpness or rigidity.

The bookshelf speakers received 120 mm midrange/woofer drivers and a tape ATM Twitter. The built-in power amplifier is capable of delivering 100 watts.

The PREMIUM 301 GEN2's excellent sound quality is primarily determined by the balanced combination of high-tech drivers and an aluminum body that is 30% tougher than in the previous series.

The speaker system body is made of aluminum, and proprietary LDR 2642 MK II and LDR 3056 tape drivers with profiled aluminum membranes are used as a high-frequency radiator.

The Coax 411 bookshelf model is an entrance ticket to the PIEGA coaxial world. The new C 112+ driver, a 160 mm diameter UHD woofer and an optimized TIM2 module form a subtle harmony of novelty.

The model received an inch-long tweeter with a fabric dome and a woofer with a 6.5-inch cellulose cone soaked in damping resin on both sides.

The model has an impressive 165-centimeter woofer, which is paired with a 25-millimeter aluminum tweeter, and is controlled by a specially designed crossover.

The Totem Bison Monitor is equipped with a new proprietary low-frequency driver with a 5.75-inch diameter long-stroke diffuser with a 3-inch sound coil operating in a phase-inverted design. The nominal resistance of the novelty is 8 ohms with a sensitivity of 87 dB.

The Element Fire V2 is equipped with modified basslines: the 7-inch proprietary Torrent woofers began to sound deeper and wider (frequencies from 25 Hz are reproduced), the basslines were also equipped with enlarged dust caps with additional damping, and an additional seventeenth magnet appeared in the magnetic system for more precise control over the coil.