Bookshelf Speakers

The Gem 2 midrange and woofer speakers feature titanium diffusers, dual neodymium magnets, large sound coils, and a sophisticated distortion suppression system, putting them at the forefront of acoustic advances. The new 1-inch tweeter (common to all Ultima 2 Series speakers) is equipped with a dome made of hard and light beryllium, as well as a proprietary third-generation waveguide, which allows you to achieve breathtaking sound transparency and eliminate coloration.

The Revel Performa M105 is a two-way bookshelf speaker available in three finishes - black and white piano lacquer, as well as a glossy natural walnut finish. The cones of the Revel Performa M105 woofers are made of aluminum, the diffuser surface is perfectly curved and seamlessly connects to the speakers, the baskets of which are equipped with ribs for greater rigidity.

The perfect sound of the Revel M126Be bookshelf speaker is based on a beryllium HF diffuser (25 mm), controlled by massive 85 mm double ceramic magnets. The powerful RF diffuser and ceramic-coated cast aluminum Acoustic Lens waveguide seamlessly integrate with the 165 mm woofer orientation with the Deep Ceramic Composite (DCC) aluminum diffuser, providing greater efficiency, less compression, improved dynamic range and less distortion, and increased power handling.

REVEL Concerta M16 is a bookshelf speaker, 2-way, with a rear bass reflex. It has a power of 120 watts, a sensitivity of 86 dB and a resistance of 6 ohms.

The bookshelf speakers are equipped with a 5.75' midrange woofer with a paper diffuser (in phase-inverted design) and a 1' silk tweeter (separate closed chamber). The sensitivity of the Wilson Audio Tune Tot is 86 dB, the resistance is 8 ohms (does not fall below 6.61 ohms), the input power is from 25 watts.

With Linear Response waveguide for high-frequency and integrated passive bass radiator Demand D11 guarantees detailed and well-balanced sound.

Two-way passive bookshelf speaker. It is equipped with a ForgeCore tweeter and a 7” (18 cm) BilletCore speaker. Impedance: 7 ohms (minimum 3.5 ohms). Sensitivity: 88 dB. Frequency range: 37 Hz – 40 kHz.

Two-way passive bookshelf speaker. It is equipped with a ForgeCore tweeter and a 6” (15 cm) BilletCore speaker. Frequency range: 40 Hz – 40 kHz. Impedance: 8 ohms (minimum 3.9 ohms).

A 28mm dome tweeter made of pure beryllium is responsible for the high frequencies in A1. The same is used in the older A3 model. The neodymium magnetic system and the latest generation damping materials in the rear camera of the tweeter can dramatically reduce distortion and bring the upper limit of the reproduced frequencies far beyond the limits of audibility.

Q-Acoustics Active 200 is a Hi-Fi class wireless bookshelf speaker. Amplifier modules operating in Class D are used, and band-pass amplification with active crossover based on DSP is implemented. The Q Active 200 shelf model has six amplifiers with a total power of 280 watts.

This is not the tiniest model: each column weighs about 15 kg, which is quite a lot for shelves. On the front panel there is a 6.5-inch midbass speaker and an enlarged 1.1-inch tweeter. At low frequencies, the bass is assisted by a bass reflex mounted on the back panel.

The Concept 30 used specially designed radiators: 5-inch midrange/woofer speakers with enlarged 30.5 mm coils and 0.9-inch tweeters mounted on 3 mm thick aluminum plates. The tweeter is placed in a sealed volume and is completely isolated from the body by means of a "floating" suspension. The midrange/woofer sound coil is 30.5 mm in diameter.

Q Acoustics 5020 is a bookshelf speaker with an innovative design of midrange and woofer drivers. The C3 Continuous Curved Cone design in midrange/woofer provides smoother integration of treble with tweeter and superior bass dynamics.

The Q Acoustics Q5010 is a bookshelf speaker that stands between the 3000i models and the older Concept series. Many technologies of Q Acoustics 5000 cabinets and drivers are borrowed from the latter. In particular, this is the design of the C3 Continuous Curved Cone woofers/midrange speakers, about which Q Acoustics stated that the C3 "will form a technological platform for many years to come."

The M20 stereo pair is made according to the classic master-slave principle, when all the electronics are concentrated in one of the speakers. This is an amplifier that outputs 65 watts per channel, and a DSP module with the ability to adjust the sound depending on the location of the speakers: in a corner, against a wall, or freely. A 22mm tweeter and a 125mm woofer are responsible for the sound in each speaker. The audio signal of the Q Acoustics M20 is received via Bluetooth 5.0.

The acoustics remained quite compact: only 200x325x329 mm. But a woofer from the 3050i floor—mounted speakers got into this rounded case - a 6.5-inch speaker, which, however, was optimized for small-volume operation by updating the magnetic system and winding copper-plated aluminum wire onto coils. As a result, these babies can bass as much as 46 Hz.

The new 3000c series features the C3 midrange speaker design with a continuous curved cone. The C3 speaker, used throughout the model range, is designed to eliminate the disadvantages of traditional speakers. Introduced for the first time in the Q Acoustics 5000 series speaker range, the C3 speaker combines the advantages of a traditional rectilinear conical housing for low-frequency reproduction with an expandable housing for medium and high frequency control.

Bookshelf two-lane speakers. Precision speakers with diameters of 125 mm (5 inches) and 22 mm (0.9 inches). P2P (point-to-point) mounting. Increased internal volume.

The model uses a 22mm radiator for high frequency reproduction and a 120mm bass drive for low frequencies. This bookshelf speaker is light in weight, boasts a sensitivity of 87 dB and a nominal resistance of 6 ohms.

A bookshelf 2-way speaker system with a rear bass reflex and two speakers, the size of which is 100 mm and 22 mm. The model is ideally suited for use in conjunction with home theaters and stereo equipment.