Bookshelf Speakers

Q-Acoustics Active 200 is a Hi-Fi class wireless bookshelf speaker. Amplifier modules operating in Class D are used, and band-pass amplification with active crossover based on DSP is implemented. The Q Active 200 shelf model has six amplifiers with a total power of 280 watts.

This is not the tiniest model: each column weighs about 15 kg, which is quite a lot for shelves. On the front panel there is a 6.5-inch midbass speaker and an enlarged 1.1-inch tweeter. At low frequencies, the bass is assisted by a bass reflex mounted on the back panel.

The Concept 30 used specially designed radiators: 5-inch midrange/woofer speakers with enlarged 30.5 mm coils and 0.9-inch tweeters mounted on 3 mm thick aluminum plates. The tweeter is placed in a sealed volume and is completely isolated from the body by means of a "floating" suspension. The midrange/woofer sound coil is 30.5 mm in diameter.

Q Acoustics 5020 is a bookshelf speaker with an innovative design of midrange and woofer drivers. The C3 Continuous Curved Cone design in midrange/woofer provides smoother integration of treble with tweeter and superior bass dynamics.

The Q Acoustics Q5010 is a bookshelf speaker that stands between the 3000i models and the older Concept series. Many technologies of Q Acoustics 5000 cabinets and drivers are borrowed from the latter. In particular, this is the design of the C3 Continuous Curved Cone woofers/midrange speakers, about which Q Acoustics stated that the C3 "will form a technological platform for many years to come."

The M20 stereo pair is made according to the classic master-slave principle, when all the electronics are concentrated in one of the speakers. This is an amplifier that outputs 65 watts per channel, and a DSP module with the ability to adjust the sound depending on the location of the speakers: in a corner, against a wall, or freely. A 22mm tweeter and a 125mm woofer are responsible for the sound in each speaker. The audio signal of the Q Acoustics M20 is received via Bluetooth 5.0.

The acoustics remained quite compact: only 200x325x329 mm. But a woofer from the 3050i floor—mounted speakers got into this rounded case - a 6.5-inch speaker, which, however, was optimized for small-volume operation by updating the magnetic system and winding copper-plated aluminum wire onto coils. As a result, these babies can bass as much as 46 Hz.

The new 3000c series features the C3 midrange speaker design with a continuous curved cone. The C3 speaker, used throughout the model range, is designed to eliminate the disadvantages of traditional speakers. Introduced for the first time in the Q Acoustics 5000 series speaker range, the C3 speaker combines the advantages of a traditional rectilinear conical housing for low-frequency reproduction with an expandable housing for medium and high frequency control.

Bookshelf two-lane speakers. Precision speakers with diameters of 125 mm (5 inches) and 22 mm (0.9 inches). P2P (point-to-point) mounting. Increased internal volume.

The model uses a 22mm radiator for high frequency reproduction and a 120mm bass drive for low frequencies. This bookshelf speaker is light in weight, boasts a sensitivity of 87 dB and a nominal resistance of 6 ohms.

A bookshelf 2-way speaker system with a rear bass reflex and two speakers, the size of which is 100 mm and 22 mm. The model is ideally suited for use in conjunction with home theaters and stereo equipment.

The model uses a 25 mm fabric RF emitter with ferromagnetic coolant, a hybrid of ring and dome tweeters (such a speaker can often be found in High-End speakers), providing extremely low distortion and wide dispersion.

The Monitor Reference 2 A measures only 175 mm wide and 290 mm high. However, it still offers a full range of Reference series options. Thanks to the APTX Bluetooth 5.0 codec, the HDMI input with Arc function and other analog and digital inputs, it can replace the entire stereo system and is also an excellent speaker for computer use.

The Magnat Transpuls 800A has a horn tweeter. The tweeter with a single compression horn is powered by a 25 mm diameter fabric dome. There is a neodymium magnet. The geometry of the horn was perfectly designed to make Twitter sound not only extremely dynamic, but also very natural. The midrange/woofer has a diameter of 170 mm.

The Signature Edelstein is a two-way reflex design equipped with a tweeter with a 2.5mm thick fabric dome and a very wide rim (the so-called "spherical waveguide"), which is specially designed to more effectively dissipate high frequencies and minimize tweeter vibrations. The tweeter is complemented by a midrange/woofer with a diameter of 11.5 inches.

Magnat Monitor S10 D walnut bookshelf speaker thanks to 110 mm woofer and three 13 mm dome tweeters, Monitor S10 D components perfectly harmonize with the acoustics of other speakers.

Compact two-way bookshelf speaker with midrange/woofer FE-Dynamics with a new dust cap with optimized phase, as well as low vibration, coated paper diffuser and magnetic system with optimized distortion. A 13mm tweeter with an ultralight mylar dome and a powerful ferrite core for precise high frequency reproduction. Crossover with optimized amplitude and phase.

The model is a two-way shelf speaker, which boasts excellent technical and sound characteristics, as well as deep bass.

A 30 mm dome is installed inside, which allows the treble speaker to work with a low crossover frequency and work perfectly with the midrange speaker. The optional 20mm super dome tweeter is the basis for an extended frequency response exceeding 50 kHz.

The model's phase-reversal system covers a range from 31 to 54,000 Hz and has a sensitivity of 91 dB with a nominal resistance of 4 to 8 ohms. The Magnan Signature 703 allows 110 watts of power (with peaks up to 180 watts), and the recommended amplifier should provide at least 20 watts per channel (single-stroke lamp this is not the place).