Loudspeakers

Morgan Acoustics speaker systems use a scientific design approach and use the highest quality audio components.

The NIME Black Diamond is a passive subwoofer with an unusual crystal—like body shape.

Name Audio Design Poetica uses a 25 mm tweeter, a 158 mm midrange speaker and a 220 mm woofer. The diffusers of all speakers are made of ceramic. The acoustics operate in frequency response from 34 to 25,000 Hz and have a resistance of 8 ohms. Sensitivity at Nime Audio Design Poetica

This model is equipped with one 25 mm tweeter with a ceramic dome and a 170 mm woofer. The speakers are complemented by a bass reflex port.

The Naim Audio Design Elite Two speaker system is equipped with a 22-centimeter paper woofer and a 3 cm diameter tweeter with a ceramic dome.

The Name Audio Design Elite One has a Thiel & Partner Accuton 25 mm ceramic tweeter and a Thiel & Partner Accuton 173 mm midrange/woofer (the latter's diaphragm, again, is made of ceramic). Despite their modest size (310 x 270 x 430 mm), the speakers weigh 45 kg each.

The Vandersteen Model 2W Subwoofer is optimized for multi-channel systems in which the signal to the subwoofer is supplied from a preamp/processor due to the inability to switch on the external crossover section between the preamp and the power amplifier.

This model boasts increased performance compared to the 2WQ subwoofer. It received an 11 mm driver for deeper bass and is capable of producing 325W of output.

The Vandersteen SUB NINE can be used as an independent stereo pair or in combination with a Model 7 floor speaker or any other high-quality speaker.

The Vandersteen Model VSM-1 is a rear wall mounted speaker system designed specifically for multi—channel systems. They use a coaxial woofer and twitter speaker with a common speaker center.

Small-sized front speakers for home cinema, designed for systems in which the installation of Vandersteen floor speakers is not possible. The coaxial assembly includes a 165mm woofer with a molded basket and a 25mm tweeter with a special alloy dome and critical damping. The crossover is based on 1st order filters with compensation of frequency and phase distortions.

The Vandersteen VLR model is characterized by a comfortable and tireless sound with fairly large images. The sound easily goes beyond the speakers, they seem to dissolve into space. The feed is convex and open. The overall sound is natural and homely. The tone is slightly warm, the timbres are somewhat simplified. Jazz is going very well, popular music is excellent, classical music is not bad, but simplified.

The Vandersteen 1Ci+ speaker system uses Vandersteen's proprietary technology, a dynamically balanced installation of matched drivers that optimizes the radiation pattern and transient characteristics of the radiators while maintaining the time ratios of the various spectral components of the original signal in its original form.

The Vandersteen Model 2Ce Signature is a 3-way system. The 8-inch woofer, made on a cast basket, is equipped with a lightweight and rigid polymer diffuser with mineral filler; the diffuser design provides high resistance to bending vibrations.

The components used in the Model 3A Signature combine classic durability and reliability with innovative design and construction. The dome tweeter made of metal alloy has a two-chamber design for improved range and linearity. It is critically damped to extend the high frequencies beyond the range of audibility without the excessive ringing inherent in open or insufficiently damped metal dome tweeters. The special alloy used for the dome was chosen because of its superior strength and fracture resistance.

The Vandersteen Treo CT is a full—range floorstanding loudspeaker. A patented high-frequency driver with a loaded transmission line and a 4.5-inch, mid-range, reflection-free driver release energy before it can flow back into the room and into the listener's ears.

The elegant Quattro cases are more loyal to the interior and take up less space compared to the above analogues. The speakers have the ability to adjust the bass recoil linearization in a similar way to the Model 5, from which the Quattro differs at a significantly lower price due to a simpler body design.

A stylish model with an unusual design, but realistic and high-quality sound for every audiophile.

A 25 mm PerfectPiston tweeter (carbon fiber balsa) on the front and a 19 mm RF driver on the back (ceramic-coated dome) are responsible for high frequencies. They are complemented by a 114 mm midrange driver (balsa carbon fiber), a pair of 280 mm Fusion woofers in the subwoofer and a paired 178 mm Perfect-Piston woofer.

The Genesis Advanced Technologies G7 Foxtrot is an entry—level passive floorstanding loudspeaker. The model has a completely redesigned design with isobaric woofers instead of a powered servo bass.