Loudspeakers

The Legacy Audio AERIS model is a 4.5-band floorstanding loudspeaker, which for the first time used the Dual Air Motion Tweeter (AMT) RF emitter, consisting of two parts — a 4-inch ribbon tweeter and an inch ribbon super tweeter with an upper limit of the frequency range of 30 kHz.

The Legacy Audio V is an active 4-band bookshelf loudspeaker that impresses with perfect all-band consistency and a unique outstanding design. The speaker is paired with an external 56-bit Wavelet processor, which combines the functions of a preamp, a DAC and acts as a digital crossover with a DSP processor.

Legacy Audio Valor speakers are equipped with a total of eight drivers in a 4-way configuration. The central position is occupied by a group of two AMT radiators connected by a titanium-polyester diaphragm in a precisely designed waveguide.

Floorstanding loudspeakers Lyritech Magic 10 Galeano Plus are based on branded full-range frivers with 10" diffusers - hence the ten in the model number.

It is equipped with a proprietary integrated Class D amplifier, which allows the subwoofer to achieve a maximum output power of 450 watts. The phase reflex speaker system is equipped with a dynamic low-frequency radiator with a diffuser diameter of 385 mm, made of polymer micro-reinforcing fiber, and has amplitude-frequency characteristics of 35 Hz - 120 Hz (+/- 3 dB).

The MS-400 model is equipped with an integrated D-class amplifier and a dynamic low-frequency woofer with a long-stroke diffuser with a diameter of 9.8 inches (228 mm) made of polymer micro-reinforcing fiber.

The Mission MS-200 SUB is designed for bass support in home theaters or for extending the bass range in stereo systems. The MS-200 SUB is equipped with a 10-inch (250-mm) long-stroke driver and a built-in 120-watt Class D amplifier.

The Mission MS-150 SUB is designed for bass support in small home theaters or for extending the bass range in stereo systems. The MS-150 SUB is equipped with an 8-inch (200 mm) long-stroke driver and a built-in Class D amplifier with a power of 70 watts.

The Mission MS includes a specially designed low-frequency long-stroke driver and an ultrafast Class D balanced drive power amplifier, manufactured to provide powerful response.

The subwoofer is equipped with a 10-inch (250 mm) long-stroke driver with a non-pressed paper diffuser (with increased damping properties) and a built-in Class D amplifier with a power of 200 watts (350 watts at peak).

The subwoofer is equipped with a 12-inch woofer, which is located on the front panel of the case behind a removable protective mesh. The bass is mounted on an anti-resonance basket, has a powerful magnet and a lightweight sound coil with an increased diameter, and its diffuser moves with a large amplitude to create significant sound pressure.

The model is equipped with a 12-inch (300 mm) long-stroke driver with a non-pressed paper diffuser (with increased damping properties) and a built-in class D amplifier with a power of 300 watts (450 watts at peak).

The new model is twice as heavy as the original from 1980 due to the use of a two-layer housing with a gasket made of anti-vibration mastic. The main speaker received a white 165 mm polypropylene diffuser with mineral salts and an enhanced magnetic system. A tweeter with a 28 mm microfiber dome is responsible for high frequencies.

As with the flagship 770, Mission has developed a new woofer/midrange speaker with a polypropylene diffuser and a magnetic system for the specific Mission 750 model. The bass reflex port has been carefully profiled both internally and externally to achieve very low distortion and extend the bass to frequencies below 42 Hz indoors. The Mission 750 has the same tweeter as the flagship 770 and 700 models, with a specially damped rear camera for a 28mm dome that provides ultra-smooth high frequencies.

A new 20-centimeter polypropylene midrange/woofer has been developed for the modern Mission 770. 44 years ago, the polypropylene diffuser was considered the main feature of the model. The new version received a mineral-enriched membrane and a nitrile outer suspension.

The Mission ZX-5 is the senior floorstanding loudspeaker in the flagship ZX Series, equipped with two 165mm (6.5") woofers with aluminum diffusers, one 130 mm (5.25") midrange speaker with aluminum diffuser, and a 38 mm (1.5") annular dome tweeter. As in other speaker systems of the ZX Series, it implements many innovations created by the company's engineers.:

Mission ZX includes specially designed bass speaker cones, precision motor systems, advanced treble blocks, and more. As always with Mission products; "Music leads, technology follows." Without compromise.

The Mission ZX-3 is the youngest floorstanding model in the flagship ZX Series, equipped with two 130mm (5.25”) woofer/midrange speakers with aluminum diffusers and a 38mm (1.5”) annular dome tweeter. As in other speaker systems of the ZX Series, it implements many innovations created by the company's engineers.

The Mission ZX-2 is the senior bookshelf model in the flagship ZX Series, equipped with two 130mm (5.25”) woofer/midrange speakers with aluminum diffusers and a 38mm (1.5”) annular dome tweeter. As in other speaker systems of the ZX Series, it implements many innovations created by the company's engineers.

The model received a high-frequency radiator with a branded “ring dome” and made of woven textiles in the form of a double ring. Due to its design, it has a low distortion level and eliminates the effects of dome cavitation. Its double back cavity reduces resonance.