Loudspeakers

Frida is a two—way passive speaker system from SV-Audio. The speaker housings are made of carbonized and natural bamboo strips.

This model is capable of filling rooms with an area of 20 to 50 square meters with sound. A speaker with a 30-cm diffuser made of impregnated paper is installed inside the cubic case. The acoustic design is a bass reflex with a port located on the front panel.

Sigberg Audio Saranna active loudspeakers are capable of operating in the range of 20 Hz indoors. The acoustics is made in a three-band configuration with separate amplification of each band. The discreet design hides front mounted coaxial driver consisting of an 8" midbass/midrange and Polymide compression driver, 2 x rear mounted 8" woofers, and active 3-channel Hypex nCore class D amplifier with DSP (600 W per speaker)

The Cambridge Audio Minx X201 compact active subwoofer is equipped with one 170 mm woofer located on the front panel and two passive bass radiators of the same diameter on the sides. This solution is very effective for small subwoofers in which the use of a large bass speaker is impossible, and the traditional acoustic design in the form of a bass reflex does not significantly expand the bass the range. The power of the built-in amplifier of the Cambridge Audio Minx X201 subwoofer is 200 watts.

The Minx X301, like its model range counterparts, is equipped with a unique development of the company: a digital signal processing (DSP) processor, thanks to which the necessary signal correction is performed, taking into account all the design features of the Minx subwoofers and satellites. The digital amplifier in this average model can produce 300 watts of power!

An extremely compact active subwoofer with an 8-inch driver and an efficient amplifier with an output power of 70 watts. The SX-120 subwoofer, developed from scratch by London—based Cambridge Audio, delivers deep, punchy low frequencies, fast and crisp - the perfect bass extension for music and movies.

All speakers of the SX series are equipped with a silk dome tweeter with a diameter of 25 mm with an additional foam absorber located behind the radiator, which, according to the developers, compensates for unwanted reflections and allows you to create a wide stage.

The Cambridge Audio Min 12 is great for creating 2.1 music systems as well as multi-channel home theater kits. The Dynamic BMR (Balanced Mode Radiator) radiator combines the advantages of diffuser and membrane (NXT) designs with a very low distortion level over the entire operating frequency range.

The Cambridge Audio Minx Min22 speaker system is designed to be used in conjunction with the company's subwoofer in 2.1 or 5.1 sets. Unlike the Min12 model, the Min 22 speakers are equipped with an additional woofer, which made it possible to expand the frequency range and make the sound more saturated, albeit by increasing the size of the case. This model is available in a white lacquer finish that is resistant to mechanical damage.

The SX50 uses midrange/woofer speakers made of processed paper, and a tweeter with a soft dome made of processed silk takes care of the high frequencies. The cases of the devices are made of MDF.

According to the manufacturer, the operating range of the Cambridge Audio EVO S extends from 50 Hz to 40 kHz with a sensitivity of 88 dB and a nominal resistance of 8 ohms. With very modest dimensions (284 x 200 x 216 mm), the weight of each column is an impressive 7.1 kg.

This is a three-way floor speaker system with a ribbon tweeter, a 4.5-inch midrange speaker and a pair of 6.5-inch woofers.

The Scansonic HD speakers of the M series use passive rear-mounted radiators instead of the usual bass reflex. This solution provides dense, controlled bass, flexible placement options and noise exclusion of the bass reflex port. Passive radiators enhance the bass, giving the sound of any type of acoustics a remarkable depth and scale.

All speakers in the M series are equipped with ribbon tweeters. Due to the low moving mass of the membrane, they respond faster and more accurately to high-frequency transients. The result: exceptional detail reproduction, plenty of air, and instant pulse processing. Due to the low level of distortion and high-definition sound at any volume, they form the basis of the musical style of the M series.

The biggest floorstanding model of the Ariane range offers 2 × 8″ paper cone woofers, 6.5" midranges, 20 mm soft dome tweeters and works in frequency range (+/- 3 dB) : 33 - 20000 Hz.

Direct and reverse faull horn loudspeakers with a single fullrange driver. In the new Intelligence III model, the thickness of the cabinets of the reverse horn is significantly increased, the direct and reverse horns are lengthened by a quarter, the cutoff frequency of the reverse horn is lowered by 10 Hz. Cabinet's form of a seamless monocoque with a special laying of the reinforcing material guarantees exellent sound quality.

Three-way full scale sound lodspeakers with five drivers (2 x 9" woofers, 2 x 3" soft domes midranges, and 1" soft dome tweeter per one speaker). 3" ribbon-wound voice-coils for bass/mids offers high dynamic sound.

The speakers of the Børresen T series are largely inspired by the Børresen M series and use many of the technologies implemented in the speakers of this series. The new products, which are decorated with piano lacquer, carbon fiber and natural wood veneer, combine refined aesthetics and uncompromising acoustic characteristics.

The T5 model is offered in two versions: standard and Silver Supreme Edition (SSE). Both variants have speakers of the same caliber and a similar body design, but the key technological points in them are different.

The T3 model is equipped with copper pole rings that are resistant to magnetic flux changes, while the Silver Supreme Edition models use silver pole rings for even greater conductivity, which further improves the resolution and transparency of the sound in the midrange.