Musical Fidelity introduces new Nu-Vista 600.2 integrated amplifier
22.12.2024 06:14
A new integrated amplifier from the British company Musical Fidelity Nu-Vista 600.2 scheduled for release since January 2025. The device is fully consistent with the brand's philosophy and uses a massive design with a dual mono configuration, a solid power supply, preamplifier and power-amp filtering and the use of Class-A tube stage consisting of nuvistor tubes.
Musical Fidelity Nu-Vista 600.2 guarantees 2 x 160 W of power at 8 Ohm load, when using 4 Ohm loudspeakers, the power increases to 300 W. The device also works without problems with 2 Ohm speakers, delivering 500 W per channel! The entire signal chain now uses only high-quality polypropylene capacitors, the input stages are now implemented on relays, and the precision volume control even at low signal levels functions with an error of +/- 0.5dB gain.
The preamplification circuits in the Musical Fidelity Nu-Vista 600.2 are designed in a shielded separate volume hidden in the upper part of the device. The Nu-Vista tubes have been taken from the PRE/PAS models and feature 6S51N nuvistors in a discrete class A. Two balanced XLR inputs add flexibility in switching.The model weighs a solid 36 kg. and will cost 8,990 euros.
Specifications
This product is in the Hi-Fi and High End Electronics and Acoustics database
Integrated amplifiers — Musical Fidelity Nu-Vista 600.2
Model name
Nu-Vista 600.2
Type
Integrated amplifier with Class-A tube stage consisting of nuvistor tubes
Analog inputs (balanced)
2
Analog inputs (single-ended)
4
Input sensitivity (mV)
N/A
Input impedance (balanced) (Ω)
N/A
Input impedance (single-ended) (Ω)
N/A
Output impedance (balanced) (Ω)
N/A
Output impedance (single-ended) (Ω)
N/A
D/A conversion
N/A
Phono MM/MC current-sensing input impedance (Ω)
N/A
Output power (8Ω) (W)
2 x 160
Output power (4Ω) (W)
2 x 300
Gain (dBu)
N/A
Frequency response low +/- 3dB (Hz)
N/A
Frequency response high +/- 3dB (Hz)
N/A
Signal to Noise Ratio (dB)
N/A
Total Harmonic Distortion + Noise (%)
N/A
Damping factor
N/A
Dimensions (mm)
N/A
Weight (kg)
36
Official link
More content
Pro-Ject Amp Box RS2 – Compact Power Amplifier
Pro-Ject has introduced a compact stereo power amplifier Pro-Ject Amp Box RS2. A distinctive feature of the new product is the use of a pair of vacuum tubes and the ability to switch the model to a bridged mode.
TIDAL AP1 – Extra Class Active Loudspeakers
German company TIDAL presented the floorstanding active acoustics TIDAL AP1. The idea of the new model was born with the launch of the TIDAL x Bugatti project - TIDAL AP1 is designed to transfer the quality of the company's top speakers to a slightly more affordable High End segment.
Yamaha NS-600A – Bookshelf Speakers with Precise Sound and Luxurious Finish
The Yamaha NS-600A speakers feature balanced and precise sound (thanks to the proprietary Harmonious Diaphragm technology) and an impressive finish of the cabinets, reminiscent of the finish of grand pianos. The Yamaha NS-600A uses innovative RS (Resonance Suppression) chambers located at the rear of the tweeter
Børresen M2 – compact loudspeakers with a grown-up sound
Danish acoustic brand Børresen Acoustics, part of Audio Group Denmark, has introduced the floorstanding speakers Børresen M2. Despite its compact dimensions, the model achieves excellent sound quality and offers a whole range of proprietary innovative developments (from a new speaker design to revolutionary methods of resonance damping).
AUER ACOUSTICS Versura V4 – Flagship Loudspeakers With Beryllium Tweeters
The new AUER ACOUSTICS Versura V4 acoustic systems are designed according to the 3.5-way principle and use 34 mm beryllium dome tweeters, a 12 cm midrange driver and the 18 cm woofer. But the main bass arsenal here is the side-radiating woofer – the 32 cm driver size allows performs from 20 Hz.
