Posts with tag "Integrated amplifier"

Matrix Audio releases new integrated amplifiers with a digital-to-analog converter and full streaming functionality - Matrix Audio MD-1 and MD-1P. The first model, offering 2 x 150 W of output power, is suitable for the "entry" level, the senior device will provide a power of 2 x 300 W.

By resuming the introduction of 300B tubes, Western Electric has created a full-scale storm on the audiophile market. Well, the American manufacturer has many more things in its arsenal that can surprise fans of good sound – for example, the Western Electric 91E integrated single-ended amplifier, which we are testing today.

Bluesound has introduced a new generation of the Bluesound Powernode network integrated amplifier. The model now uses gallium nitride (GaN) amplification technology and is equipped with three amplification channels for the center speaker in home theater mode. At the same time, the Bluesound Powernode can operate in traditional stereo mode – then the power will be 2 x 100 watts, and when switching to three-channel mode – 80 watts.

Danish company Lyngdorf has introduced the Lyngdorf TDAI-2210 integrated streaming amplifier with analog and digital inputs. The new amp replaces the well-known TDAI-2170 model and uses a modular architecture that allows for future expansion.

Choosing an affordable Hi-Fi integrated amplifier, or more expensive Top Hi-Fi equipment, is a difficult and responsible task, the market is literally flooded with these devices. We have prepared for you a guide and comparison of seven of the best new integrated amplifiers in the price range from $449 to $5,000 - each of which deserves close attention in its range.

Rotel DX-5 is a compact model, but despite its dimensions, the device does not use digital amplification and operates in class A/B, reaching 2 x 33 W into 4 Ohm load and 2 x 25 W into 8 Ohm speakers. The new product is equipped with a power supply based on a powerful toroidal transformer created by Rotel itself, and high-current transistors.

A very powerful (2 x 400 W into 8 Ohm and 2 x 400 W into 4 Ohm loudspeakers) integrated amplifier JAVA HI-FI Carbon Double Shot is presented. The model uses a fully balanced dual-mono configuration with an LDR pre-amp stage and GaN FET power amp stage.

Rega has introduced the seventh generation of the Brio series integrated amplifier - Rega Brio Mk7. The amp, like its predecessors, is housed in a compact case and offers a power of 2 x 50 W at 8 Ohm load or 2 x 73 W at 6 Ohm. "On board" along with a headphone amplifier (with a 3.5 mm minijack post) and a phono preamplifier for working with both moving magnet (MM) and moving coil (MC) pickup cartridges, a digital-to-analog converter module has also appeared.

Cayin has released an update to its well-known integrated amplifier model – the Cayin MT-35 MK3. In addition to three RCA inputs, the amp received a wireless streaming module Bluetooth (AAC, aptX HD and LDAC) with a fairly powerful built-in digital-to-analog converter based on the ES9018K2M Sabre32 chip.

Audiolab has introduced a new generation of the 6000A integrated amplifier, operating in class AB and equipped with a toroidal transformer – the model is called Audiolab 6000A MkII. In addition to the new version of the built-in digital-to-analog converter, an HDMI port for connecting to a TV has appeared on board.

French company Pier Audio presented the integrated amplifier Pier Audio MS 1000 SE. The model uses a large-sized 800 VA power transformer wound in the old style with high quality copper and weighs 23 kg. Up to a power of 2 x 20 W per channel, Pier Audio MS 1000 SE operates in class A, then switches to class AB, developing up to 2 x 150 W at 8 Ohm load and doubling the power to 2 x 300 W at 4 Ohm speakers.

French audio equipment manufacturer Atoll Electronique has updated many of its component lines – among the announcements is the integrated amplifier Atoll Electronique IN400 Evolution. The model offers a power of 2 x 160 W at 8 Ohm load and 2 x 300 W at 4 Ohm and offers a number of very interesting engineering solutions.

The new NAD CI SA2-120 BluOS streaming integrated amplifier is a part of CI Modular Series, and offers high power with minimal dimensions - 1/3 width x 1U height. The model uses DirectDigital digital amplification with built-in thermostatic cooling, allowing installation of the amp in a professional rack and offers a power of 2 x 120 W. The platform also allows switching to a 4 x 60 W configuration and the use of an additional pair of outputs with Dynamic Load Management system.

The Japanese company SPEC CORPORATION has introduced a new integrated amplifier SPEC RSA-EX1000. The model uses a main board designed to minimize the length of the passage of musical signals from the volume control to the low-pass filter - according to the manufacturer, this preserves even the weakest signals and ensures a wealth of detail. Of course, the sound quality is also improved by reducing the inductance (coil effect) due to the minimization of internal wiring.

Fezz Audio has introduced the Fezz Olympia Mono Power Amplifier and the Fezz Olympia Dual Mono Amplifier. The models are based on KT88 tubes and offer high output power.

The second generation of BRAMA audio equipment from Vinnie Rossi offers significant improvements in both the design of the devices and their sound quality. In total, three devices were released in the line - a preamplifier, a monoblock power amplifier and an integrated amplifier. All devices are built using a fully balanced dual mono input-to-output architecture and are equipped with only XLR commutation.

The Japanese brand Onkyo presented a new series stereo equipment at the CES 2025 exhibition - the Onkyo Icon P-80 network preamplifier, the Onkyo Icon M-80 power amplifier and the Onkyo Icon A-50 streaming integrated amplifier.

Polish company MOREaudio has introduced a new integrated amplifier CS100, which, according to the manufacturer, “features an innovative topology inspired by the legendary Single-Ended designs” - in this case, we are talking about a system where abandoned the global feedback loop in favor of local feedback at each stage.

Choosing an integrated amplifier of both Hi-Fi and High End class can be a simple matter with our new article-rating of the best modern devices in this category. The future-proof engineering solutions and outstanding sound are achievable today in different price segments.

A new integrated amplifier from the British company Musical Fidelity Nu-Vista 600.2 scheduled for release since January 2025. The device is fully consistent with the brand's philosophy and uses a massive design with a dual mono configuration, a solid power supply, preamplifier and power-amp filtering and the use of Class-A tube stage consisting of nuvistor tubes.