Posts with tag "amp"

French audio equipment manufacturer Atoll Electronique has updated many of its component lines – among the announcements is the integrated amplifier Atoll Electronique IN400 Evolution. The model offers a power of 2 x 160 W at 8 Ohm load and 2 x 300 W at 4 Ohm and offers a number of very interesting engineering solutions.

The Japanese company SPEC CORPORATION has introduced a new integrated amplifier SPEC RSA-EX1000. The model uses a main board designed to minimize the length of the passage of musical signals from the volume control to the low-pass filter - according to the manufacturer, this preserves even the weakest signals and ensures a wealth of detail. Of course, the sound quality is also improved by reducing the inductance (coil effect) due to the minimization of internal wiring.

The flagship High End power amplifiers from Constellation Audio, the Statement Mono Amplifier and Statement Stereo Amplifier, use a whole clip of the company's innovations and provide outstanding sound quality.

Fezz Audio has introduced the Fezz Olympia Mono Power Amplifier and the Fezz Olympia Dual Mono Amplifier. The models are based on KT88 tubes and offer high output power.

The second generation of BRAMA audio equipment from Vinnie Rossi offers significant improvements in both the design of the devices and their sound quality. In total, three devices were released in the line - a preamplifier, a monoblock power amplifier and an integrated amplifier. All devices are built using a fully balanced dual mono input-to-output architecture and are equipped with only XLR commutation.

The Japanese brand Onkyo presented a new series stereo equipment at the CES 2025 exhibition - the Onkyo Icon P-80 network preamplifier, the Onkyo Icon M-80 power amplifier and the Onkyo Icon A-50 streaming integrated amplifier.

Polish company MOREaudio has introduced a new integrated amplifier CS100, which, according to the manufacturer, “features an innovative topology inspired by the legendary Single-Ended designs” - in this case, we are talking about a system where abandoned the global feedback loop in favor of local feedback at each stage.

The inability of the amplifier to control the speakers is a fatal and most common mistake when composing and installing audio systems. Insufficient drive of the speaker systems can cross out all the rest of the work on selecting components - and the money will be literally wasted. Well, in this "how to" guide, we will consider the most important points that allow you to get the most out of the loudspeakers and give step-by-step instructions for assessing the compatibility of components.

SMSL has introduced the SMSL PA200 stereo power amplifier – offering both volume control and switching to bridge mode. Thus, with one signal source, the owner can save on preamplifiers, and in the case of creating a multi-component installation, easily switch the system to monoblock amplification mode.

Greek company Lab12 has released the Lab12 Mighty tube power amplifier, operating in class A and providing an output power of 2 x 10 W. The model is compatible with both the Lab12 Hpa and True branded preamplifiers, as well as with a wide range of preamplifiers from other manufacturers.

Choosing an integrated amplifier of both Hi-Fi and High End class can be a simple matter with our new article-rating of the best modern devices in this category. The future-proof engineering solutions and outstanding sound are achievable today in different price segments.

The Japanese company Air Tight has presented the latest revision of its famous amplifier Air Tight ATM-1 (the first device was released in 1986, and in 2006 a more advanced version ATM-1s was released). The amplifier uses a push-pull circuit on 1/12AT7 (ECC81), 2/6CG7 (6FQ7) and 4/EL34 tubes.

Japanese manufacturer of High End electronics, Soulnote presented a stereo (2 x 120 W at 4 Ohms) power amplifier A-3core, which implements the concept of "dual mono". Each channel of amplification is powered by a separate toroidal 700 W transformer.

Following the Reference Preamp, the Swiss company Nagra has introduced the Nagra Reference AMP monoblock power amplifiers. The model replaces the well-known Nagra HD AMP and boasts a 25% larger power supply with 2000 VA transformers.

A new integrated amplifier from the British company Musical Fidelity Nu-Vista 600.2 scheduled for release since January 2025. The device is fully consistent with the brand's philosophy and uses a massive design with a dual mono configuration, a solid power supply, preamplifier and power-amp filtering and the use of Class-A tube stage consisting of nuvistor tubes.

German company Burmester calls its new Burmester 232 integrated amplifier “swiss army knife” for audio. The model offers high fashionability and optional offers a full set of streaming functions.

Eleven Audio (Taiwan, Taipei), has introduced the compact integrated amplifier A390, equipped with the proprietary technology of isolated voltage and current amplification (VCIA). This approach is designed to minimize distortion and ensuring accurate sound of even the most complex load.

Dividing amplification circuits into a preamplifier and a power amplifier is one of the main cornerstones of High End audio. Such installations offer the highest possible quality due to the isolation of critical signal transmission circuits and the use of independent power supplies - but they also conceal a lot of pitfalls and possible errors in the pairing of components. In this article, we will try to highlight the main critical points of such a selection of equipment and highlight the most important specifications of amplification equipment that you should pay attention to when choosing.

The Canadian company Eon Art has presented an extraordinary solution – the Eon Art Hadron integrated amplifier, which is designed in three blocks for each channel! At first glance, the system looks like it uses two power supplies, but this is not so. One of the modules is responsible for filtering alternating current and converting it into direct current. The second module is, in fact, the power supply of the system. The third is an amplifier. This solution was realized after the company conducted a series of studies on the problems of alternating current for powering high-quality audio sources.

CH Precision is a bright star in the firmament of modern High End, but the company's top 10th series is designed to reconsider the boundaries of what is possible from equipment of any class. Today we are testing the two-block power amplifier CH Precision M10 Stereo - a device that flaunts innovative circuit solutions and offers mind-blowing sound quality.