Floorstanding loudspeakers — Hifiverse audio equipment catalog

Emotion XT F200 is the flagship of the Motion line, which implements the most advanced technologies. The high-performance, low-distortion FMT XT Gen2 Obsidian and the Folded Motion waveguide, seamlessly combined with a Nomex Kevlar-reinforced midrange speaker and triple 8-inch aluminum woofers, create a truly unsurpassed listening experience.

An EFX electrostatic emitters are equipped with a filter made according to the Vojtko proprietary scheme based on audiophile-level technical solutions borrowed from the CLX speaker crossover. The filter is carefully assembled by Martin Logan specialists manually: mounted mounting, capacitors with a polypropylene dielectric, massive coils without a core and a specially designed W-shaped transformer are used.

The Martin Logan Electromotion ESL is a hybrid speaker system using an 8-inch diameter woofer and a large 860x218 mm XStat CLS electrostatic driver. The Martin Logan Electromotion ESL acoustics feature detailed, balanced sound and reproduce frequencies in the range from 42 Hz to 22 kHz.

The ES LX model occupies the top position in the Martin Logan ElectroMotion line. This is the largest hybrid thermostat in the family, and one of the most affordable speaker systems of this type in the brand's catalog (ESL X is second only to ElectroMotion ESL in this regard). Unlike the ESL, the ESL X, which is one step higher, has a larger electrostatic converter, and in the bass part there is a pair of 8-inch woofers in a bass reflex design with a port in the bottom of the woofer housing.

The hybrid speaker uses a CLS electrostatic treble/midrange driver on a new ultra-rigid aluminum frame "AirFrame Blade", and the dynamic woofer section is equipped with two 200 mm drivers. The key feature is the integration of a new type of crossover speaker into the architecture, which brilliantly copes with the task of accurately distributing the signal between different types of drivers.

The Martin Logan Impression ESL 11A is equipped with Anthem Room Correction (ARC) sound correction technology. ARC technology measures the sound signal of midrange/woofer drivers and compares the room response to the reference, optimizing the sound for a more "transparent and natural woofer sound."

The ELAC FS 409.2 floorstanding loudspeaker is equipped with a JET VI ribbon tweeter. The ultralight tape membrane provides an instant response to the received signal, resulting in high sound accuracy. Another advantage of such a Twitter is a very wide frequency range with an upper limit of 50 kHz.

The rounded corners of the housing not only give the ELAC FS 408.2 an elegant appearance, but also eliminate sound distortion caused by acoustic wave diffraction.

The speaker body is tilted back at a slight angle. This ensures the most consistent sound of the drivers and aligns the stereo picture. The geometry of the case in cross-section is close to a trapezoid, the width of the slightly convex front panel exceeds the width of the rear wall. This solution makes it possible to effectively deal with internal resonances.

Compact 2.5-way floorstanding speakers. Low-frequency drivers with a diameter of 150 mm with combined AS diffusers mounted on a cast basket. JET 6 branded AMT ribbon tweeter of the new generation. The crossover is made of selected components.

The model is a three-band design in which the main part of the frequency range is reproduced by a coaxial concentric driver consisting of a JET 5 ribbon radiator and a Ring Radiator midrange driver with an aluminum diffuser of a complex Crystal Membrane profile.

The speakers have a four-band configuration, which is also necessary in this market segment. A combined treble/midrange unit is installed in the upper part of the front panel of the ELAC Concentra S509, consisting of a concentrically arranged Jet 5 ribbon tweeter and a treble/midrange driver with a 130 mm aluminum diffuser.

The ELAC Concentro S507 four-way floorstanding loudspeaker occupies a junior position in the flagship speaker series. The low-frequency register is handled by as many as four 150 mm long-range woofers built into the sides of the ELAC Concentro S 507 case (two on each side) and covered with round grills. Thanks to the special ICD configuration (Impluse Compensated Design), it is possible to minimize unwanted mechanical vibrations and obtain a powerful, clear and precise bass without any staining.

The ELAC Carina FS 247 floorstanding speakers have a 2.5-band configuration and, with a fairly compact size, provide an assertive sound with powerful bass. The speakers are made in damped MDF housings reinforced with additional couplers to dampen unwanted resonances.

The ELAC Navis ARF-51 is equipped with proprietary drivers that have been designed specifically for these acoustics and have precisely set parameters. They have a combined radiator, which consists of a 4-inch midrange speaker with an aluminum diaphragm and a tweeter mounted in its center with a 1-inch soft dome.

The main part of the frequency spectrum of this model — above 300 Hz — is processed by XStat CLS electrostatic converters with a width of 13 inches (about 325 mm). They implement a number of well-known Martin Logan technologies. The CLS panels (Curvilinear Line Source) used in the Martin Logan Expression SL 13A, as in all MartinLogan electrostatic speakers, optimize the transmission of high-frequency information and stereo panoramas.

In the flagship Martin Logan Renaissance ESL 15A hybrid electrostatic speakers, the CLS (Curvilinear Line Source) XStat panel with a 15-inch-wide MicroPerf stator is combined with an active low-frequency link, including two 12-inch woofers in separate enclosures and a 500-watt Class D amplifier controlled by a 24-Bit Vojtko DSP Engine processor.

The speakers are equipped with new drivers and have a three-way configuration. The emitters for medium and high frequencies in the ELAC Uni-Fi Reference UFR52 are combined into a single design — a coaxial driver. It consists of a 1-inch tweeter with a soft dome covered with a protective mesh, which is placed in the center of a 4-inch midrange speaker. The diffuser of the latter is made of aluminum and has a low weight and high rigidity.

The ELAC Debut Reference DFR 52 has a three-band configuration and is equipped with two low-frequency drivers. They have a diameter of 5.25 inches, which made it possible to keep the case narrow enough for convenient placement of the speaker in a residential interior.

The ELAC UniFi Reference UF52 floorstanding loudspeakers are part of the company's updated model series, which is a further development of the Uni-Fi and Uni-Fi 2.0 lines. These speakers have received a completely updated design that fully meets the requirements of today's high-end models.