Floorstanding loudspeakers — Hifiverse audio equipment catalog

The Fyne Audio F501E is a floorstanding loudspeaker from the F500E series of budget speakers. She received an Isoflare driver equipped with a proprietary Fine multi-fiber diffuser with a FyneFlute suspension and a titanium dome tweeter with a powerful neodymium magnetic system.

The IsoFlare coaxial design developed by Fine Audio implements a point sound source with isotropic sound field energy and uniform directivity. Thanks to it, a three-dimensional stereo panorama with a clear localization of sound sources is achieved.

The Fine Audio F303i occupies the top position in the F300 line and will provide the most extensive dynamics, openness and purity of sound. Powerful rich sound from a two-way speaker with two 150mm woofer/midrange drivers and a 25mm dome treble driver.

Fyne Audio F302i is a transition to a new floor format made by Fyne engineers based on the shelf model F301. By increasing the volume of the case and fine-tuning the bass reflex, the overload capacity is increased, the depth of the bass and the dynamics of the sound are expanded, both at low and high volume levels.

In the new Fyne Audio F1-8S speaker, the mounting of the IsoFlare coaxial driver has been improved, and the crossover circuit has been changed to take into account the operation of the radiators in a larger housing. The IsoFlare coaxial driver works almost as a point source of sound – an ideal option in terms of the phase consistency of the radiators.

The model has the most powerful IsoFlare driver ever made by Fine Audio: a 300mm woofer/midrange diffuser and a 75mm treble dome.

The main feature of the Fyne Audio F1-10 as a source of sound waves is the point nature of sound emission. The entire spectrum of sound frequencies is radiated from a single point, which meets all acoustic requirements for coherence, phase accuracy and delay of the musical signal.

The Response D48 is a completely new speaker system compared to the D40. The ProAc Response D48 is equipped with a completely new midrange/woofer driver with a conical diffuser made of carbon fiber with compressed paper pulp.

The Response D30 floorstanding towers received a 165 mm diameter driver with a carbon fiber diffuser of the finest weave with a polymer coating on the back and concentric damping rings.

The new model uses a 165 mm woofer similar to the one installed in the D18, and a dome fabric high-frequency driver as a tweeter. The result is completely new speakers with an expanded sound stage, deep bass, a light and detailed treble range, and a natural midrange.

The design of the latest ProAc Response DT8 floorstanding loudspeakers uses two 6.5-inch drivers. One of them has a diffuser made of proprietary Pu Mica (mica-impregnated cellulose) material and provides powerful and deep bass.

The case design is enhanced with an 8-inch bassline with a Kevlar diffuser, providing an extended and natural bass response. It is complemented by a mid-frequency ProAc unit with an ultralight 3-inch diaphragm, complemented by a new design wave trap.

The ProAc K6 Signature speakers use the same housing as the K6 model: well-proportioned and slim design. At the same time, the new K6 Signature differs in many ways compared to the K6. Firstly, the driver layout has been redesigned so that the ribbon tweeter is at the level of the listener's ears in a sitting position, and secondly, a new three-inch ProAc midrange driver is used, unlike the two-inch one used in the K6.

The ProAc Kevlar K6 uses two Kevlar woofers at once, which allow you to get powerful bass of impressive depth (the lower limit frequency of these speakers is 25 Hz) from relatively small speakers. Speaker housings have a phase inverter design, and the ports of the phase inverters are almost invisible.

The new Kevlar driver is designed specifically for the K3 model and features not only powerful, dynamic and deep bass, but also a clear, unpainted midrange. The K3 model uses two such drivers, as well as one ribbon tweeter, which has proven itself in previous models, placed symmetrically between them in the center of the speaker. The ProAc Kevlar K3 ribbon tweeter has the lightest aperture, allowing you to transmit the most subtle microdynamic effects.

The Aspen FR10 speakers from PS Audio are just over 1 meter high and 20 cm wide, but they weigh an impressive 34 kg. The novelty is equipped with a new 8-inch midrange driver and uses solutions developed for the flagship Aspen FR30 in a more compact form factor. Combined with the same tweeter as in the older models, a 2.5–inch planar driver with a Teonex diaphragm, the Aspen FR10's sound pattern is largely similar to that of the older models in the series.

The acoustics have a three-way design, two passive drivers with a diameter of 10 inches on the side panels are used as acoustic decoration. The high frequencies are assigned to a 2.5-inch planar driver with a diaphragm made of Tenax material, and in the middle there is another planar driver with a diaphragm made of the same material, but already 10 inches in size.

The Aspen FR30 is a system consisting of a pair of 2.5—inch planar magnetic RF drivers with a Teonex diaphragm, a 10-inch midrange with a similar diaphragm, and four 8-inch bass drivers with an aluminum diffuser.

MICRA III speakers are the youngest model in the Classic series from Diapason Italia. Despite its compact size, the MICRA III does an excellent job of reproducing the brightest sound and may well compete with more expensive counterparts.

These two-way monitors are assembled in elegant, narrow cases decorated with natural wood. The support platforms with low legs have become an elegant addition. Dynamic heads of proprietary design are installed under the perforated metal grills. The lower part of the band is voiced by a 110mm bass with a polymer diffuser, while the upper part of the band is provided by a 26mm silk tweeter.